There are three buttons and an LED recessed behind the bezel. These buttons are used to
configure the unit and reset parameters to factory defaults:
Figure 3.
A
B
C
TLP 700MV Rear Panel Features and Connections
Figure 4.
TLP 700MV Front Panel with Bezel removed
Reset button — Allows the unit to be reset in any of four different modes (see
Modes
on page 41).
Menu button — Activates the
(see page 12).
Reset LED — Visible only when the bezel has been removed. It lights as an indicator
Reset Modes
for the Reset modes (see
TLP 700MV Rear Panel Features
on-screen menus
for setting up and calibrating the unit
on page 41).
A
B
C
TLP 700MV and TLP 700TV • Panel Features
A A A
B B B
C C C
Reset
Power Connector
Video Input
Network Connector
5