N3: Software cams, position switching signals
13.2 Cam signals and cam positions
Figure 13-4
Software cams for modulo rotary axis (plus cam - minus cam > 180 degrees)
13.2.2
Generation of cam signals with gated output
The plus and minus cam output signals are gated in the case of:
● timer-controlled cam signal output to the four onboard outputs on the NCU
● Output to the NCK I/O, if the 2nd byte in the following machine data was not specified (= "0"):
MD10470 SW_CAM_ASSIGN_FASTOUT_2
...
MD10473 SW_CAM_ASSIGN_FASTOUT_4
404
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA