Alarm Suppression (Cpmalarm) - Siemens SINUMERIK 840D Function Manual

M3: Coupled axes
14.5 Generic coupling
Real movement:
Simulated movement:
Note
The states in the columns for leading axes 1 and 2 also apply if there are several leading axes/
spindles, which have the same state with reference to the axis/spindle disable.
14.5.5.19

Alarm suppression (CPMALARM)

The CP keyword CPMALARM can be used to suppress coupling-related alarms.
Programming
Syntax:
Designation:
540
Real movement means that positioning movements are trans‐
ferred to the position control.
Simulated movement means that no positioning movements are
transferred to the position control. The real machine axis re‐
mains stationary. This corresponds to the state of an activated
axis/spindle disable or program test.
CPMALARM[FAx]= <value>
Coupling Mode Alarm
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA