Setting Data; General Setting Data; Channel-Specific Setting Data; Axis/Spindle-Specific Setting Data - Siemens SINUMERIK 840D Function Manual

H1: Manual traversing
17.16 Data lists
Number Identifier: $MA_
32431 MAX_AX_JERK
34210 ENC_REFP_STATE
35130 GEAR_STEP_MAX_VELO_LIMIT[n]
17.16.2

Setting data

17.16.2.1

General setting data

Number Identifier: $SN_
41010 JOG_VAR_INCR_SIZE
41050 JOG_CONT_MODE_LEVELTRIGGRD
41100 JOG_REV_IS_ACTIVE
41110 JOG_SET_VELO
41120 JOG_REV_SET_VELO
41130 JOG_ROT_AX_SET_VELO
41200 JOG_SPIND_SET_VELO
17.16.2.2

Channel-specific setting data

Number Identifier: $SC_
42690 JOG_CIRCLE_CENTRE
42691 JOG_CIRCLE_RADIUS
42692 JOG_CIRCLE_MODE
42693 JOG_CIRCLE_START_ANGLE
42694 JOG_CIRCLE_END_ANGLE
17.16.2.3

Axis/spindle-specific setting data

Number Identifier: $SA_
43320 JOG_POSITION
730
Description
Maximum axis-specific jerk during path movements
Measuring system status
Maximum velocity for gear stage
Description
Size of the variable increment for incremental manual
traversing or manual traversing using a handwheel
Jog/continuous mode for continuous manual traversing
JOG: Revolutional/linear feedrate
Axis velocity in JOG mode
Revolutional feedrate of axes in JOG mode
Axis velocity of the rotary axes in JOG mode
Velocity for spindle in JOG mode
Description
Center of circle
Circle radius
Jog circle mode
Start angle for circular travel in JOG
End angle for circular travel in JOG
Description
JOG position
Function Manual, 06/2019, A5E47437747B AA
Axes and spindles