Axis/Spindlespecific Machine Data - Siemens SINUMERIK 840D Function Manual

Number Identifier: $MC_
20110 RESET_MODE_MASK
20150 GCODE_RESET_VALUES
20151 GCODE_RESET_MODE
20360 TOOL_PARAMETER_DEF_MASK
20620 HANDWH_GEOAX_MAX_INCR_SIZE
20622 HANDWH_GEOAX_MAX_INCR_VSIZE
20624 HANDWH_CHAN_STOP_COND
20700 REFP_NC_START_LOCK
21150 JOG_VELO_RAPID_ORI
21155 JOG_VELO_ORI
21158 JOG_JERK_ORI
21159 JOG_JERK_ORI_ENABLE
21160 JOG_VELO_RAPID_GEO
21165 JOG_VELO_GEO
21166 JOG_ACCEL_GEO
21168 JOG_JERK_GEO
17.16.1.3

Axis/spindlespecific machine data

Number Identifier: $MA_
30450 IS_CONCURRENT_POS_AX
30600 FIX_POINT_POS[n]
30610 NUM_FIX_POINT_POS
31090 JOG_INCR_WEIGHT
32000 MAX_AX_VELO
32010 JOG_VELO_RAPID
32020 JOG_VELO
32040 JOG_REV_VELO_RAPID
32050 JOG_REV_VELO
32060 POS_AX_VELO
32080 HANDWH_MAX_INCR_SIZE
32082 HANDWH_MAX_INCR_VELO_SIZE
32084 HANDWH_STOP_COND
32090 HANDWH_VELO_OVERLAY_FACTOR
32300 MAX_AX_ACCEL
32420 JOG_AND_POS_JERK_ENABLE
32430 JOG_AND_POS_MAX_JERK
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA
Description
Initial setting after reset / program end
Reset position of the G groups
Reset behavior of the G groups
Definition of the tool parameters
Limitation of the geometry axes
Path-velocity override
Definition of the manual traversing behavior using a
handwheel, channel-specific
NC start disable without reference point
Conventional rapid traverse for orientation axes
Conventional velocity for orientation axes
Maximum jerk when manually traversing orientation ax‐
es
Jerk limitation for manual traversing of orientation axes
activated
Conventional rapid traverse for geometry axes
Conventional speed for geometry axes
Maximum acceleration when manually traversing ge‐
ometry axes
Maximum jerk when manually traversing geometry ax‐
es
Description
Default setting at reset: Neutral axis or channel axis
Fixed point positions of the axis
Number of fixed point positions of an axis
Weighting of an increment for INC/handwheel
Maximum axis velocity
Rapid traverse in jog mode
Axis velocity in job mode
Revolutional feedrate in JOG mode with rapid traverse override
Revolutional feedrate for JOG
Reset position for positioning-axis velocity
Limitation of the selected increment size
Limitation of the selected increment for velocity override
Behavior, handwheel travel
Ratio of JOG velocity to handwheel velocity (with DRF)
Maximum axis acceleration
Basic setting of axis-specific jerk limitation
Maximum axis-specific jerk for single-axis movements
H1: Manual traversing
17.16 Data lists
729