P1: Transverse axes
4.6 Data lists
Program code
...
N100 WAIT(1,1)
N110 GETD(Y)
N120 Y100
4.6
Data lists
4.6.1
Machine data
4.6.1.1
Channelspecific machine data
Number
Identifier: $MC_
20050
AXCONF_GEOAX_ASSIGN_TAB[n]
20060
AXCONF_GEOAX_NAME_TAB[n]
20100
DIAMETER_AX_DEF
20110
RESET_MODE_MASK
20112
START_MODE_MASK
20150
GCODE_RESET_VALUES[n]
20152
GCODE_RESET_MODE[n]
20360
TOOL_PARAMETER_DEF_MASK
20624
HANDWH_CHAN_STOP_COND
27100
ABSBLOCK_FUNCTION_MASK
4.6.1.2
Axis/spindlespecific machine data
Number
Identifier: $MA_
30460
BASE_FUNCTION_MASK
124
Comment
;wait for synchronous marker 1 in channel 1
;Axis replacement direct Y
;Y is the channel-specific diameter programming
;subordinated in channel 2; i.e. dimension in the radius
Description
Assignment of geometry axis to channel axis
Channel axis name in the channel
Geometry axis with transverse axis function
Definition of the control basic setting after power-up and RE‐
SET / part program end
Definition of the control basic setting for NC start
Basic setting of the G groups
G command basic setting at RESET / part program end
Definition of tool parameters
Definition of the behavior of the manual handwheel traversing
Parameterize block display with absolute values
Description
Axis functions
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA