FULTON Vantage VTG Series Installation And Operation Manual page 97

This manual is provided as a guide
to the correct operation and
maintenance of your equipment,
and should be read in its entirety
and be made permanently
available to the staff responsible
for equipment operation. It should
not, however be considered as a
complete code of practice, nor
should it replace existing codes or
standards which may be
applicable. Synex reserves the
right to change any part of this
installation, operation and
maintenance manual without
notice.
Do not install, operate, service, or
repair any component of this
equipment unless you are qualified
and fully understand all
requirements and procedures.
All information in this manual is for
reference and guidance purposes,
and does not substitute for
required professional training,
conduct, and strict adherence to
applicable jurisdictional
/professional codes or regulations.
Questions? Call (315) 298-8510, or visit us online at www.fulton.com
ModSync
The ModSync Sequencing System is designed to maximize the seasonal efficiency of
multiple hydronic condensing boiler installations. The ModSync provides advanced
functionality over existing sequencing systems. The ModSync's Outdoor Reset
feature resets the hydronic loop temperature based on the outdoor temperature.
Enhanced Lead/Lag capabilities are provided through user friendly displays and an
easy to use Touchscreen Interface.
This manual details the ModSync setup screens and configuration for use with
Hydronic Boilers
The ModSync is available in two models and slight variations may exist between the
installed ModSync and the figures in this manual.
6