System Configuration Menu; System And Scaling Screen 1 - FULTON Vantage VTG Series Installation And Operation Manual

firing rate. When the boiler is in Manual the boiler will respond only to manual commands made by Manual
Control and Manual Rate %.
Interface: Touchscreen option that allows the user to Enable/Disable the Modbus communication from the
ModSync to the individual boiler. When the interface is enabled the button will display the boiler type (EDR, VTG,
EDR+). When the interface is disabled it will display Disabled. When the interface is enabled the ModSync will
continuously attempt to communicate to the boiler. If the boiler is not able to communicate for any reason (for
example if it is powered off for maintenance purposes) this will cause long delays in the Modbus communication to
the other boilers on the network which can cause inconsistent control of the remaining boilers. It is recommended
that if a boiler is being shut off the interface to the boiler be disabled first. This will prevent any problems with
communication to the remaining boilers. Once the boiler is back online the interface can be re-enabled.

System Configuration Menu


The System Configuration Menu allows access to multiple values used in the initial configuration of the ModSync.
This screen can be accessed by selecting the option from the main menu or navigation bar at the bottom of the
screen. See figure 7.
*The System Configuration screen is also another location to find the serial number of the ModSync.

System and Scaling Screen 1


Questions? Call (315) 298-8510, or visit us online at www.fulton.com
Figure 7 – System Configuration Menu
19