Table of Contents
Advertisement
2.4 Service display
DISPLAY
Service display ON
Bus:000V 00,00Hz
Gen:000V 00,00Hz
Main:000V 00,00Hz
Bus:000V 00,00Hz
Relay: MCB OFF
f
U GCB OFF
While looking at the service display, the frequency indicator (LED horizontal row
below the display) will act as a LED synchronoscope, with the sync. point at the
centre.
2.5 Mains power setpoints
DISPLAY
Configurate controls
YES/NO
Page 6 of 35 Tlf. (+45) 9614 9614 · Fax:(+45) 9752 4720 · E-mail: deif@deif.com
Factory
Commis-
set
sioning
value
ON
Factory
Commis-
set
sioning
value
NO
DESCRIPTION
OFF/ON. Selection of display of
double voltage, frequency and
phase angle and relay positions
(commissioning help).
If ON, the next 3 displays will follow:
Busbar voltage, Busbar frequency
Generator
voltage,
frequency
Mains voltage, mains frequency
Busbar voltage, busbar frequency
Breaker status:
Mains breaker ON/OFF
Gen. Breaker ON/OFF
Control relays:
Freq. UP:
f+
Freq. DOWN:
f-
Voltage UP:
U+
Voltage DOWN: U-
DESCRIPTION
Selection of changing power
setpoints. If NO the following sub-
parameters will not be displayed.
generator
Advertisement
Table of Contents
