Step 13: Hand Mode Operation - YASKAWA iQpump Micro Quick Start Manual

iQpump Micro
Quick Start Procedure
STEP
Hand Mode Operation
13
13.1 HAND Mode
The iQpump Micro is operated in HAND mode by performing the following tasks:
• Program all parameters
• Verify motor rotation direction
F40. 0 0
Press to access HAND Speed. Use
Press to save value.
Hand Speed Reference from Analog Input (0 to 10 Vdc)
Set parameter P5-01 'HAND Mode Ref.' to '0' to adjust the hand mode reference
from an external 0 – 10V signal connected to terminals TB1-1, A1 and AC.
YASKAWA TOEP YAIQPM 01A iQpump Micro Quick Start Procedure
LED Digital Operator (Standard)
PRESS HAND MODE
PRESS TO TURN OFF
040. 0 0
to change HAND Speed value.
Page 28
0 to 10 Vdc Connection
0 ~ 10 Vdc
Cable
Shield
E(G)
of 31