YASKAWA iQpump Micro Quick Start Manual page 8

iQpump Micro
Quick Start Procedure
STEP
Install the 24 V Transducer Power Supply (continued)
5
5.2
Prior to Installing the 24V Power Supply
Prior to installing the 24V Power Supply, wire the drive, make necessary connections to the drive terminals, and verify that
the drive functions normally without the 24V Power Supply installed. Refer to the product manual packaged with the drive
for information on wiring and connecting the drive.
The installation procedure differs slightly depending on enclosure type. The enclosure type is identified within the drive model
number.
5.3
Locate the drive model number using
5.4
Identify the drive enclosure type. Use
type.
Note: Installing the 24V Power Supply on an IP20/NEMA 1, UL Type 1 enclosure drive voids NEMA 1, UL Type 1 protection while
maintaining IP20 conformity.
CIMR - PW 2
5.5
Select proper installation tools according to enclosure type and model.
Note: Tools required to prepare the 24V Power Supply cables for wiring are not listed in this manual.
Model
Number
Enclosure
Type Digit
F
G
YASKAWA TOEP YAIQPM 01A iQpump Micro Quick Start Procedure
Figure
Figure 1.3 Model Number Location
Figure 1.4
Drive
iQpump
No.
V
No.
1-phase, 200-240 Vac
B
2
3-phase, 200-240 Vac
4
3-phase, 380-480 Vac
Figure 1.4 Drive Enclosure Type Identification
Table 1.1 Tool and Material Requirements (Customer Supplied)
Drive Enclosure
Drive Capacity
Type
IP20/NEMA 1, UL
All
Type 1
2V0030 to
2V0069
IP66/NEMA 4X, UL
4V0018 to
Type 4X
4V0038
Other capacities
1.3.
Micro
Model Number Location
to find the digit within the model number that identifies the enclosure
V 0010
Customized
No.
Specifications
Standard model
F
Voltage Class
G
No.
A
Drive Capacity
Screwdriver
Phillips screwdriver
M3 metric
#1, #2 U.S. standard size
Note: Screw sizes vary by
drive capacity. Select a
screwdriver appropriate for
the drive capacity.
F A A
Enclosure
Design
Type
Revision
Order
IP20/NEMA 1,
UL Type 1
IP66/NEMA 4X,
UL Type 4X
Environmental
Specification
Standard
Tools
Socket Wrench
Not applicable
10 mm socket wrench
8 mm socket wrench
Page 8
of 31
Materials
Wire Tie with
Adhesive Mount
All models
Not applicable