52
en | Configuration and Diagnostics
Parameter
Towers Available
Base Station ID
Current Band
Data Class
Temperature
6.3.3
2 = Standard Communication Configuration, 3 = Advanced Communication
Configuration
For information on the parameters in the Standard Communication Configuration menu and
Advanced Communication Configuration menu refer to Communication Configuration, page 58.
6.3.4
4 = System Configuration
For information on the parameters in the System Configuration menu refer to System
Configuration, page 72.
6.3.5
5 = Input Configuration, 6 = Output Configuration
For information on the parameters in the Input Configuration menu and Output Configuration
menu refer to Input Configuration, page 78 and Output Configuration, page 79.
6.3.6
8 = Maintenance
This option allows you to configure various maintenance-related activities to your B465
module. Various activities include changing the passcode, running diagnostics, resetting to
factory default settings, perform firmware upgrades, clear/reset status, and other tests. For a
full listing and parameter description, refer to the table below.
Setting the Maintenanceoption:
1.
2.
3.
Refer to the table below for Maintenance and Maintenance sub-menu descriptions.
Option
2017.11 | 05 | F.01U.311.207
Description
This field shows the number of towers that can be detected by the
module.
This field shows information about the tower you are currently
connected to.
This field shows the current band frequency.
This field shows one of the following; 1xRTT, 3G, GPRS, EDGE, WCDMA,
HSPA, 4G LTE.
This field shows the internal temperature of the radio transceiver (in
Celsius).
Enter the B465 passcode.
Select [8] Maintenance.
Enter the desired options.
Press to
start
Installation and Operation Manual
Description
Conettix Universal Dual Path Communicator
Bosch Security Systems, Inc.