Install A Communication Program - Bosch Conettix ITS-DX4020-G Installation And Operation Manual

GPRS/GSM IP Communicator
Figure 4.4 Found New Hardware Wizard Finish Page
8.
4.2.2

Install a Communication Program

To use a USB connection from a laptop or desktop PC to the ITS-DX4020-G to configure the
ITS-DX4020-G, you must use a Microsoft communication program.
–
–
When you perform the installation, follow the prompts in the installation wizard, but on the
Select Components page of the wizard, select Compact installation from the drop-down list.
Refer to Figure 4.5, Page 23.
Figure 4.5 Setup - Tera Term Wizard's Select Components Page
Bosch Security Systems, Inc.
Click Finish to complete the installation of the ITS-DX4020-G USB driver.
Windows XP and Earlier: The Microsoft Windows XP and 2000 installation automatically
installs HyperTerminal, a Microsoft communication program, when Windows installs. If
HyperTerminal is not installed, install it from the Windows XP or Windows 2000
installation disc, or install Tera Term from the ITS-DX4020-.
Windows Vista and Windows 7: Windows Vista and Windows 7 installations do not
install a communication program when the operating system installs. Install Tera Term
from the ITS-DX4020-G CD.
Installation and Operation Guide
Configuration | en 23
F01U163066 | 01 | 2010.05