System Configuration; Panel Phone Line Setup; Panel Reporting Format; Tone Duration (Milliseconds) - Bosch Conettix B465 Installation And Operation Manual

Universal dual path communicator
Hide thumbs Also See for Conettix B465:
Table of Contents

Advertisement

72
en | System Configuration
8

System Configuration

Use the parameters in this section to configure the B465 for the Panel Phone Line, for
supervision of the primary power, battery, and enclosure tamper, and for RPS.
8.1

Panel Phone Line Setup

Use the parameters in this section to configure the B465 panel phone line connection.
8.1.1

Panel Reporting Format

Default: Auto Detect
Selections:
Select the handshake tone for the reporting format the control panel connected to the B465
uses.
Notice!
Connected control panel might need the correct handshake sent first
The connected control panel might require that the correct handshake tone is sent first or it
will not send the report. If you selected Auto Detect and the control panel is not sending
reports, select the handshake tone for the reporting format the control panel uses.
USB Menu Location
[4] System Configuration > [1] Panel Phone Line Setup > [1] Panel Reporting Format
8.1.2

Tone Duration (milliseconds)

Default: 1000 (milliseconds)
Selections: 200 to 1500 (milliseconds)
The B465 uses this duration for the handshake tones for all reporting formats.
USB Menu Location
[4] System Configuration > [1] Panel Phone Line Setup > [2] Tone Duration
8.2

Primary Power Supervision

8.2.1

Primary Power Source

Default: AC
Selections:
USB Menu Location
[4] System Configuration > [2] Primary Power Supervision > [1] Primary Power Source
2017.11 | 05 | F.01U.311.207
Auto Detect - the B465 cycles through the handshake tones for each panel reporting
format until the control panel responds. The order is: 2300 Hz, 1400 Hz, Dual Tone, SIA,
Modem II, Modem IIe/IIIa
Dual Tone - handshake tone for Contact ID (SIA DC-05) reporting format
2300 Hz - for pulse formats that require a 2300 Hz handshake tone
1400 Hz - for pulse formats that require a 1400 Hz handshake tone
SIA - handshake tone for SIA DC-03 format
Modem II - handshake tone for Bosch (Radionics) Modem II format
2
Modem IIe/IIIa
- handshake tone for Bosch (Radionics) Modem IIe and Modem IIIa
formats
AC - the primary power source for the B465 is 16.5 VAC
(D1640 and D1640-CA plug-in transformers, D1640-120WI wire-in transformer)
DC - the primary power source for the B465 is 24 VDC.
Installation and Operation Manual
2
Conettix Universal Dual Path Communicator
Bosch Security Systems, Inc.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents