Table of Contents
Advertisement
64
en | Communication Configuration
7.9.2
Port Number
Default: 7700
Selections: 1 to 65,535
This is the port number the B465 uses for communication with the central station receiver.
USB Menu Location
[3] Advanced Communication Configuration > [2] Receiver Setup > [2] Secondary Receiver >
[1] Port Number
7.9.3
Ethernet Supervision Time
Default: 1 hour
Selections:
–
–
–
–
–
–
–
–
The B465 must receive an ACK (acknowledgement) to a heartbeat poll within the time defined
by the Ethernet Supervision Time parameter. To reduce network traffic, the B465 adjusts the
heartbeat poll rate, ACK wait time, and Retry Count to support the Ethernet Supervision Time
you select.
If the B465 does not receive an ACK to a heartbeat poll after the retry count is met, it creates
a Communication Trouble event.
USB Menu Location
[3] Advanced Communication Configuration > [2] Receiver Setup > [2] Secondary Receiver >
[3] Ethernet Supervision Time
7.9.4
Cellular IP Address / Host Name
Default: blank
Selections:
–
–
Enter an IPv4 address, an IPv6 address or host name.
The B465 uses this IP address to send reports to the central station receiver over Cellular
technology.
Further information
IP Address and Domain Name formats
USB Menu Location
[3] Advanced Communication Configuration > [2] Receiver Setup > [2] Secondary Receiver >
[4] Cellular IP Address / Host Name
7.9.5
Cellular Supervision Time
Default: 1 hour
Selections:
–
–
–
2017.11 | 05 | F.01U.311.207
No polling
90 seconds
180 seconds
200 seconds
5 minutes
1 hour
4 hours
24 hours
IPv4 - 0.0.0.0 to 255.255.255.255
IPv6 - 0000:0000:0000:0000:0000:0000:0000:0000 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
No polling
90 seconds
180 seconds
Installation and Operation Manual
Conettix Universal Dual Path Communicator
Bosch Security Systems, Inc.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
