Honeywell VPR100 User Manual page 57

Symbol Name
Display
Display 1
1
Display 2
1 2
* Note: Changing to ONLINE mode by pressing any of the Display buttons can cause
incorrect values to be displayed. The values will correct themselves in a few seconds.
To avoid this potential annoyance, first change to online mode by selecting SET MODE
from the PROGRAM or MAINTENANCE menus, then press a Display button to access
the displays.
12/00
Table 3-1 Button functions (continued)
Function
For instruments with the control option:
From any display or menu, pressing this
button changes the instrument to online
mode* and accesses the display
programmed as Display #2. Repeated
presses accesses displays #3 through #10,
then wraps around to display #2 again.
For instruments without the control option:
From any display or menu, pressing this
button changes the instrument to online
mode* and accesses the display
programmed as Display #3. Repeated
presses accesses displays #4 through #10,
then wraps around to display #3 again.
See Table 4-63 on page 161 for more
information on the Displays.
From any display or menu, pressing this
button changes the instrument to online
mode* and accesses the display
programmed as Display #1.
See Table 4-63 on page 161 for more
information on Displays.
This button is only available on non-control
instruments.
From any display or menu, pressing this
button changes the instrument to online
mode* and accesses the display
programmed as Display #2.
See Table 4-63 on page 161 for more
information on Displays.
VPR & VRX – User Manual
Programming and Operating Concepts
Operating mode in which function
applies
Program Online
á á
á á
á á
á á
Maint
á
á
á
á
41