Table 4-62 Set Up Profile Display Prompts - Honeywell VPR100 User Manual

Programming Function Blocks and Features
Set Up Profile 1
Table 4-62 describes the prompt for setting up a Profile display. Affects the Setpoint Profiler Trend
displays only.
Prompt
DISPLAY TIME Number
Set Up Profile 2
Set Up Profile 3
Set Up Profile 4
See Table 4-62 for prompt description for setting up displays for Profiles 2-4.
160

Table 4-62 Set Up Profile Display Prompts

Range/Selections
VPR & VRX – User Manual
Definition
Enter the time width of the profile trend display, in the time
units of the profile. The higher this number, the more of a
profile will fit on the screen at a time. A value of zero means
the entire profile will be displayed, if the profile has no infinite
segment loops, no infinite auto cycling, and no external ramp
type.
12/00