Figure 2-2 Vrx150 Mounting - Honeywell VPR100 User Manual

295
(11.61")
79
(3.11")
19.7
(0.77")
Front view
NOTE: Dimensions in mm (inches)
Thin panel mounting-
install bottom bar
the same as top bar.
Thick panel mounting-
install bottom bar
the same as top bar.
ATTENTION
To cover cutouts left by previous instruments, order panel mounting adapter plates (see Table 11-1).
12/00
1.52-12.7 (.06"-.500")
Panel
Rear of "box"
279
(10.98")
Mounting Bar slots
top & bottom
19.7 (0.77")
47.75 (1.88")
342.4 (13.48")
294.6 (11.60")
304.8 (12.00")Min.
Side view
Notched end of bar
towards thin panel
Notched end of bar
away from thick panel

Figure 2-2 VRX150 Mounting

VPR & VRX – User Manual
(5.43")
Panel
Panel
Cutout
Cutout
Recommended
minimum 254 mm
Panel
(10") cutout spacing
Cutout
on sides and top for
access to screws on
sides and top of
VRX150.
7.6mm (0.300")
Maximum height of
screw after mounting
Mounting Bar
M3x8 (or 12) mm lg
pan head screw
7.6mm (0.300")
Maximum height of
screw after mounting
M3x8 (or 12) mm lg
pan head screw
Installation
138
138
(5.43")
19