Program Totalizers - Honeywell VPR100 User Manual

Programming Function Blocks and Features

4.14 Program Totalizers

The optional totalizer integrates an analog value over time. With the input being viewed as a flow rate, the
function outputs a running total TLn OV over time.
ATTENTION
Totalizers which exceed the value 999,999 may only be displayed on the dedicated "Totalizer Display". If the
value is programmed on other displays or stored to disk, when it exceeds the programmed limits the value may
be truncated and the value will flash.
Select a Totalizer to program. Table 4-51 describes the Totalizer prompts. See Table 4-2 for additional
prompts.
146 VPR & VRX – User Manual 12/00