Table 6-2 Point/Detail Menu Prompts - Honeywell VPR100 User Manual

Prompt
SCROLL Press the Up Arrow or Down Arrow buttons to scroll the trend forward or backward in time.
Press Tab key to change to the next point on a multi-point trend.
Press the Menu button to restore the Point/Detail menu. The trend display will remain at the
time determined by the SCROLL.
Press the Display button to restore the original primary display and cancel the SCROLL.
SET HOLD, Causes one point to remain displayed in the scoreboard. Available for live trend only.
REL HOLD Before selecting SET HOLD, press Point/Detail to change the scoreboard to the desired
point. Select SET HOLD and press Enter. An "H" appears in the lower right display. The
HOLD will remain in effect until deliberately removed with REL HOLD.
To HOLD a different point, press the Tab key until the desired point is shown, then press the
Display button.
To release the HOLD, select REL HOLD.
DETAIL
Use the Up Arrow and Down Arrow buttons to move the line cursor forward or backward in
time. The value of the displayed point will change to its value at the new time.
If desired, press Tab to change to the next point on a multi-point trend.
Press the Menu button to restore the Point/Detail menu. The trend display will remain at the
chosen point.
Press the Display button to restore the primary display and cancel DETAIL feature.
FIND Lets you display the trend from a certain time. A list of times will appear on the display, as
shown. FIRST is the oldest time available in the trend. LAST is the most recent time
available.
FIRST: JAN
LAST:
FIND:
Select month, day, year, hour and minute. To cancel the search, press Display, Menu,
Display1 or Display2 buttons.
When the data has been found, the selected time/date will appear in the center of the trend
area. The Point/Detail menu will also appear.
ZOOM Lets you magnify (zoom) the displayed scale
Press the Up Arrow and Down Arrow buttons to select the amount of magnification, shown in
the lower right corner of the display. Note that the size of the Zoom cursor changes
accordingly. See Figure 6-4.
OFF – uses point's trend display limits (turns Zoom off)
2X – uses half of point's trend display limits
4X – uses one fourth of point's trend display limits
FULL – uses point's programmed limits (not its trend display limits)
Press the Tab key to select the point/trace to be zoomed (magnified).
Press Enter to display the magnified trend. The Point/Detail menu is displayed to allow
further analysis.
Press the Display button to restore the primary display with the ZOOM limits. A "Z" appears in
the lower right of the display.
12/00

Table 6-2 Point/Detail Menu Prompts

1 1999 12:00
JAN 5 1999 13:00
JAN 1 1999 12:00
VPR & VRX – User Manual
Online Operations Using Primary Displays
Definition
continued
223