Honeywell VPR100 User Manual page 189

Table 4-71 Prompts For Storage Setup Of Trends, Alarms, Events, Diagnostics (continued)
Prompt
HIGH RATE SELECTOR
SELECTORS
CHANGE WITH KEY
EXTERNAL ENABLE OFF, discrete parameter, 0, 1
SELECT FILENAME FILE
PROD
UNIT
CONFIG KILN
CALIB
FURNCE DEMIN
BATCH
LINE
ZONE
12/00
Range/Selections
CYCLE DRYER
RECORD TANK
LOOP REACTR
VESSEL
WCHEM PRESS
CONTRL
FERMTR LEHR
STRLZR OVEN
VPR & VRX – User Manual
Programming Function Blocks and Features
Definition
This discrete triggers the high storage rate when ON(1)
and the low storage rate when OFF.
This option enables/disables storage rate changes from
the Trend display Point/Trend menu. If YES, storage
Trend's high rate will be used when display Trend's
alternate timebase is selected from the Online
Point/Trend menu; Storage Trend's low rate will be used
when display Trend's normal timebase is selected. See
Table 6-2, Point/Detail Menu Prompts, Timebase.
When ON(1), this discrete parameter will allow storage of
the data type; when off storage for the data type will stop.
This enable is independent of the storage mode; it does
not control batch start/stop.
Select a file name to identify the type of data to be stored.
173