SECTION 582-210-700
TYPE CARRIER PALLET ALIGNMENT
Requirement
The pallet location in the carrier shall be
0.125 inch --- 80-column printer
0_070 inch -- 132-column printer
from the stem end to the rear surface of the carrier.
~
~ ~. ~ ~ ~ ~ ~ ~
~
To Adjust
Move all pallets from position No.1 to position No.2.
Position No.1
C1 .. __
....oIF=O
Position No.2
--~-[)
80-Column Printer
132-Column Printer
Place type carrier into proper slot on the 402878 gauge. Seat all pallets into bottom of channel.
402878 GAUGE
Page 42