Paper Jam Alarm - Bell DATASPEED 40 Adjustments And Lubrication

SECTION 582-210-700
PAPER-OUT SWITCH (Early and Late Design)
(80-Column Tractor Feed Printer)
(Early Design)
Requirement
With a 9/64-inch rod or 400136 lifter inserted in loop of paper-out spring, the paper-out switch should
operate when loop is pressed toward paper guide and should operate in the other direction when spring
is allowed to return. Determine by ear (clicking noise) or by placing the leads of an ohmmeter across
pins 10 and 11 of connector J-3. The ohmmeter should give a closed circuit reading before pressing
spring down, and open after releasing.
To Adjust
With clamp screw friction tight, position switch to meet requirement, using pry points. Tighten
clamp screw.
Page 14
~~A/UIDE
400136 LIFTER OR
<.
9/64-INCH ROD
r::====*==
PAPER· OUT SPRlNG
~:=:-:=-==='::::~~~_J
CLAMP SCREW
(Early Design)