Bsm (Blind Spot Monitor); Bsm (Blind Spot Monitor) 4 - Toyota Highlander 2020 Owner's Manual

Hide thumbs Also See for Highlander 2020:
Table of Contents

Advertisement

270
4-5. Using the driving support systems
WARNING
Do not leave the vehicle while
the engine is stopped by the
Stop & Start system (while the
Stop & Start indicator is on). An
accident may occur due to the
automatic engine start function.
Depress the brake pedal and
apply the parking brake when
necessary while the engine is
stopped by the Stop & Start sys-
tem (while the Stop & Start indi-
cator is on).
NOTICE
To ensure the system oper-
ates correctly
If any of the following situations
occur, the Stop & Start system
may not operate correctly. Have
your vehicle inspected by your
Toyota dealer.
While the driver's seat belt is
fastened, the driver's and front
passenger's seat belt reminder
light flashes.
Even though the driver's seat
belt is not fastened, the driver's
and front passenger's seat belt
reminder light does not illumi-
nate.
Even though the driver's door is
closed, the open door warning
light is illuminated or the interior
light is illuminated when the
interior light switch is in the door
position.
Even though the driver's door is
open, the open door warning
light does not illuminate or the
interior light does not illuminate
when the interior light switch is
in the door position.
HIGHLANDER_U
BSM (Blind Spot Moni-
*
tor)
*
: If equipped
The Blind Spot Monitor is a
system that uses rear side
radar sensors installed on
the inner side of the rear
bumper on the left and right
side to assist the driver in
confirming safety when
changing lanes.
WARNING
Cautions regarding the use of
the system
The driver is solely responsible for
safe driving. Always drive safely,
taking care to observe your sur-
roundings.
The Blind Spot Monitor is a sup-
plementary function which alerts
the driver that a vehicle is in a
blind spot of the outside rear view
mirrors or is approaching rapidly
from behind into a blind spot. Do
not overly rely on the Blind Spot
Monitor. As the function cannot
judge if it is safe to change lanes,
over reliance could lead to an
accident resulting in death or seri-
ous injury.
As the system may not function
correctly under certain condi-
tions, the driver's own visual con-
firmation of safety is necessary.

Advertisement

Table of Contents
loading

Table of Contents