Table of Contents
Advertisement
88
2-1. Instrument cluster
• "Sway Warning"
Select to enable/disable the vehicle
sway warning.
• "Sway Sensitivity"
Select to set the vehicle sway warn-
ing sensitivity.
PCS (Pre-Collision Sys-
tem) (P.233)
Press
to enable/disable the
pre-collision system.
• PCS (Pre-Collision System)
on/off
Select to enable/disable the
pre-collision system.
Press and hold
settings of the following item:
• "Sensitivity"
Select to change the pre-collision
warning timing.
BSM (Blind Spot Monitor)
(if equipped) (P.270)
Press
to enable/disable the
Blind Spot Monitor function.
• BSM (Blind Spot Monitor) on/off
Select to enable/disable the Blind
Spot Monitor function.
Press and hold
settings of the following items:
• "Brightness"
Select to switch the brightness of
the outside rear view mirror indica-
tors. (P.271)
• "Sensitivity"
Select to change the alert timing for
an approaching vehicle.
HIGHLANDER_U
Press
Rear Cross Traffic Alert function.
• RCTA (Rear Cross Traffic Alert)
Select to enable/disable the Rear
Cross Traffic Alert function.
Press and hold
settings of the following item:
• "Volume"
Select to change the volume of the
RCTA buzzer.
to change the
Press
Road Sign Assist.
• RSA (Road Sign Assist) on/off
Select to enable/disable the Road
Sign Assist.
Press and hold
settings of the following items:
• "Notification Method"
Select to change each notification
method used to notify the driver
when the system recognizes
excess speed and no-entry sign.
to change the
• "Notification Level"
Select to change each notification
level used to notify the driver when
the system recognizes a speed limit
sign.
■
Press and hold
the settings of the following
RCTA (Rear Cross Traffic
Alert) (if equipped) (P.284)
to enable/disable the
on/off
to change the
RSA (Road Sign Assist) (if
equipped) (P.251)
to enable/disable the
to change the
Vehicle settings
to change
Advertisement
Chapters
Table of Contents
