Toyota Highlander 2020 Owner's Manual page 259

when the vehicle has been
stopped by system control in
vehicle-to-vehicle distance
control mode)
2
Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold
the switch to change the speed,
and release when the desired
speed is reached.
In the vehicle-to-vehicle dis-
tance control mode, the set
speed will be increased or
decreased as follows:
For the U.S. mainland, Hawaii

Fine adjustment: By 1 mph (1.6
*1
km/h) or 1 km/h (0.6 mph)
time the switch is pressed
Large adjustment: Increases or
decreases in 1 mph (1.6 km/h)
1 km/h (0.6 mph)
as long as the switch is held
For Canada, Guam, Saipan,

Puerto Rico and A.Samoa
Fine adjustment: By 1 mph (1.6
*1
km/h) or 1 km/h (0.6 mph)
time the switch is pressed
Large adjustment: Increases or
decreases in 5 mph (8 km/h)
km/h (3.1 mph)
long as the switch is held
In the constant speed control
mode (P.261), the set speed
will be increased or decreased
as follows:
Fine adjustment: By 1 mph (1.6
*1
km/h) or 1 km/h (0.6 mph)
time the switch is pressed
HIGHLANDER_U
4-5. Using the driving support systems
*2
each
*1
or
*2
increments for
*2
each
*1
or 5
*2
increments for as
*2
each
Large adjustment: The speed will
continue to change while the switch
is held.
*1
: When the set speed is shown in
"MPH"
*2
: When the set speed is shown in
"km/h"
 Increasing the set speed by
the accelerator pedal
1
Accelerate with accelerator
pedal operation to the
desired vehicle speed
2
Press the "-SET" switch
Changing the vehi-
cle-to-vehicle distance
(vehicle-to-vehicle dis-
tance control mode)
Pressing the switch changes the
vehicle-to-vehicle distance as
follows:
1
Long
2
Medium
3
Short
The vehicle-to-vehicle distance is
set automatically to long mode
when the engine switch is turned to
ON.
If a vehicle is running ahead of you,
259
4