Page 1 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2 Wheel Drive 4 Wheel Drive Air Conditioning Anti-lock Brake System Accessory AI-SHIFT Artificial Intelligence Shift control Automatic Locking Retractor Child Restraint System Downhill Assist Control DISP Display Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering GAWR...
Page 2 Abbreviation list ABBREVIATIONS MEANING On Board Diagnostics Supplemental Restraint System Tire Identification Number TPMS Tire Pressure Warning System TRAC Traction Control Trailer Weight Rating Vehicle Identification Number Vehicle Stability Control...
Page 3: For Your Information
A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available on the market. You should know that these parts are not covered by Toyota warranty and that Toyota is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 4 ●Anti-lock brake system ●SRS airbag system ●Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. Scrapping of your Toyota The SRS airbag and seat belt pretensioner devices in your Toyota contain explosive chemicals.
Page 5 The computers do not record conversations, sound or pictures. ● Data usage Toyota may use the data recorded in these computers to diagnose malfunc- tions, conduct research and development, and improve quality. Toyota will not disclose the recorded data to a third party except: •...
Page 6 ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the leasing company for a leased vehicle) is obtained •...
Page 7 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 8 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 10 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping and safe-driving information. Interior Air conditioning and audio systems, as well as other features interior features for a comfortable driving experience. Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
Page 11 1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without smart key system (type A) Master keys Valet key Key number plate Vehicles without smart key system (type B) Master keys Valet key Key number plate Vehicles with smart key system Electronic keys •...
Page 12 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 557) ■...
Page 13 1-1. Key information NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high tempera- tures by placing them in direct sunlight, or get them wet. ● Do not expose the keys to electromagnetic materials or attach any mate- rial that blocks electromagnetic waves to the key surface.
Page 14 1-2. Opening, closing and locking the doors ∗ Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Electronic key Electronic key Electronic key Electronic key...
Page 15 1-2. Opening, closing and locking the doors Unlocking and locking the doors Front door handles Grip the handle to unlock the doors. Make sure to touch the sensor on the back of the handle. The door cannot be unlocked for 3 seconds after the door is locked.
Page 16 1-2. Opening, closing and locking the doors Press the button to lock the door. Opening the glass hatch (if equipped) Press and hold the button to open the glass hatch. The glass hatch will pop up. The glass hatch can be unlocked only when the back door is closed.
Page 17 1-2. Opening, closing and locking the doors Antenna location and effective range ■ Antenna location Antennas outside the cabin Antennas inside the cabin Antenna outside the luggage compartment...
Page 18 1-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors This system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the outside front door handles.
Page 19 1-2. Opening, closing and locking the doors ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless remote control from operating properly.
Page 20 1-2. Opening, closing and locking the doors The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.) Multi-information Unlocking doors Beep display Hold the driver's door han-...
Page 21 1-2. Opening, closing and locking the doors ■ Electronic key battery depletion ● The standard battery life is 1 to 2 years. (The battery becomes depleted even if the electronic key is not used.) If the smart key system or the wireless remote control function does not operate, or the detection area becomes smaller, the battery may be depleted.
Page 22 1-2. Opening, closing and locking the doors ● As long as the electronic key is within the effective range, the doors may be locked or unlocked by anyone. ● Even if the electronic key is not inside the vehicle, it may be possible to start the engine if the electronic key is near the window.
Page 23 1-2. Opening, closing and locking the doors ● When an alarm sounds: Take appropriate measures according to the following table. Alarm Situation Correction procedure Tried to lock the doors Retrieve the elec- using the entry function tronic key from the while the electronic key passenger compart- was still inside the passen-...
Page 24 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure Tried to close the driver’s door after carrying the key Shift the shift lever to outside the vehicle with the Interior and exte- P, turn the “ENGINE “ENGINE START STOP” rior alarms sound START STOP”...
Page 25 1-2. Opening, closing and locking the doors ■ Customization that can be configured at Toyota dealer It is possible to deactivate the smart key system etc. (Customizable features →P. 602) ■ Certification for the smart key system For vehicles sold in the U.S.A.
Page 26 (→P. 38) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves. Then, consult your doctor to see if you should disable the entry function.
Page 27 1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Vehicles without smart key system (type A) Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door.
Page 28 1-2. Opening, closing and locking the doors Vehicles without smart key system (type B) Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Pushing holding: Sounds alarm Pushing holding:...
Page 29 1-2. Opening, closing and locking the doors ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Back door: A buzzer sounds and the emergency flashers flash twice to indicate that the back door has been opened/closed.
Page 30 1-2. Opening, closing and locking the doors ■ Key battery depletion Vehicles without smart key system The standard battery life is 1 to 2 years. (The battery becomes depleted even if the key is not used.) If the wireless remote control function does not operate, the battery may be depleted.
Page 31 Vehicles with smart key system →P. 40 ■ Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control) can be changed. (Customizable features →P. 602) ■ Reversing the operation of the power back door Pressing the wireless remote control switch again while the power back door is operating will cause the operation to reverse.
Page 32 1-2. Opening, closing and locking the doors ■ Certification for wireless remote control MODEL/FCC IDs: Transmitter: GQ43VT20T Receiver: GQ4-34R IC (Canada) IDs: Transmitter: 1470A-1T Receiver: 1470A-6R MADE IN U.S.A. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Page 33 1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (vehicles with smart key system) →P. 35 ■ Wireless remote control →P.
Page 34 1-2. Opening, closing and locking the doors ■ Door lock switch Locks all doors Unlocks all doors ■ Inside lock button Locks the door Unlocks the door Pulling the door handle can open the front door even if the lock button is in the lock posi- tion.
Page 35 1-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
Page 36 1-2. Opening, closing and locking the doors Automatic door locking and unlocking systems The following functions can be set or canceled: Function Operation Shift position linked Shifting the shift lever out of P locks all door locking function doors. Shift position linked Shifting the shift lever to P unlocks all doors.
Page 37 1-2. Opening, closing and locking the doors ■ Setting and canceling the functions To switch between setting and canceling, follow the procedure below: STEP Vehicles without smart key system: Close all the doors and turn the engine switch to the “ON” position.
Page 38 Depending on the position of the electronic key, the key may not be detected correctly and the door may be locked. ■ Customization that can be configured at Toyota dealer Settings (e.g. door unlocking function) can be changed. (Customizable features →P. 602) CAUTION ■...
Page 39 1-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the following procedures. ■ Locking and unlocking the back door Door lock switch →P. 55 Entry function (vehicles with smart key system) →P.
Page 40 1-2. Opening, closing and locking the doors ■ Opening the back door from inside the vehicle (vehicles with power back door) Push and hold the switch to open/close. Pushing the switch again while the power back door is operat- ing will cause the operation to reverse.
Page 41 1-2. Opening, closing and locking the doors Canceling the power back door system (vehicles with power back door) Turn the main switch in the glove box off to disable the power back door system. A buzzer sounds twice and the back door can then not be opened with the wireless remote control...
Page 42 1-2. Opening, closing and locking the doors ■ If the back door opener is inoperative The back door can be operated from the inside. Remove the cover. STEP Turn the lever. STEP ■ The power back door can be opened when ●...
Page 43 If excessive force is applied to the back door while it is opening automati- cally, the power back door will stop at that position, preventing itself from fall- ing down. ■ Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control) can be changed. (Customizable features →P. 602)
Page 44 1-2. Opening, closing and locking the doors CAUTION ■ Caution while driving ● Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 45 1-2. Opening, closing and locking the doors CAUTION ■ Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● Remove any heavy loads, such as snow and ice, from the back door before opening it.
Page 46 1-2. Opening, closing and locking the doors CAUTION ● Do not attach any accessories other than genuine Toyota parts to the back door. Such additional weight on the back door may cause the back door to fall closed again after it is opened.
Page 47 IGNITION ON mode or the engine is started during automatic opera- tion ● Do not attach any accessories other than genuine Toyota parts to the back door. The power back door may not operate, causing itself to malfunction, or the back door may fall closed again after it is opened.
Page 48 Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it.
Page 49 1-2. Opening, closing and locking the doors ∗ Glass hatch The glass hatch can be opened using the glass hatch opener or wire- less remote control. ■ Wireless remote control (vehicles without smart key sys- tem) →P. 48 ■ Entry function (vehicles with smart key system) →P.
Page 50 1-2. Opening, closing and locking the doors CAUTION ■ While driving ● Keep the glass hatch closed while driving. If the glass hatch is left open, it may hit near-by objects while driving or luggage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 51 ● Do not attach any accessories other than genuine Toyota parts to the glass hatch. Such additional weight on the glass hatch may cause the glass hatch to fall closed again after it is opened, resulting in death or seri- ous injury.
Page 52 Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other than genuine Toyota parts to the glass hatch. ● Do not place your hand or foot on the damper stay or apply lateral forces to it.
Page 53 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Seat cushion (front) angle adjustment knob (driver’s side only) Pull up the lever until the lock is completely released.
Page 54 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (driver’s side only) Vertical height adjustment switch (driver’s side only) Driver’s seat leg support adjustment switch (if equipped) Seat lumbar support adjustment switch (driver’s side only) Active head restraints When the occupant’s lower back...
Page 55 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Active head restraints Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may cause the inner struc- ture of the head restraint to appear. This does not indicate a problem. During rear-end collision...
Page 56 1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats ■ Second seats Seat position adjustment lever Seatback angle adjustment lever Pull up the lever until the lock is completely released. ■ Third seats The third seats do not have a seat adjustment function. Moving a second seat for third seat access ■...
Page 57 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Getting out of the vehicle (right side only) Lift the lever on the side of the seatback and fold down the seat- back. The seat will slide forward. Move the seat to the front-most position.
Page 58 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding down the second seats From inside Pull the lever to unlock the seat- back and then fold the seatback down. From outside (if equipped) Pull the lever. L: Left side and center second seats R:Right side second seat ■...
Page 59 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seats ■ Before folding down the third seats Stow the third seat belt buckles. STEP Pass the seat belts through the STEP seat belt hangers. This helps to prevent the shoulder belts from being damaged.
Page 60 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Returning the third seats Pull the straps and raise the STEP seatbacks until they lock. Raise the head restraints. STEP Removing the second center seat ■ Before removing the second center seat Take out the side table from the STEP console box.
Page 61 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Removing the second center seat Fold down the second center STEP seatback while pulling the seat- back lock release strap. Pull the lock release lever to STEP remove the second center seat. Stow the second center seat in STEP the console box.
Page 62 1-3. Adjustable components (seats, mirrors, steering wheel) Installing the second center seat ■ Before installing the second center seat Take out the second center seat STEP from the console box. STEP Remove the side table, if used, from the second seat. (→P.
Page 63 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When adjusting a rear seat or removing the second center seat ● Be careful that the seat does not hit passengers or luggage. ● Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt.
Page 64 1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Front seats Vertical adjustment Pull the head restraints up. Down Push the head restraint down while pushing the lock release Lock release button button. Angle adjustment (if equipped) Second seats Pull the head restraints up.
Page 65 1-3. Adjustable components (seats, mirrors, steering wheel) ■ When using the third seat head restraints To use To fold ■ Adjusting the height of the head restraints (except second center seat and third seats) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Page 66 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Installing the front and second seat outer head restraints Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
Page 67 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 68 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the belt (front seats) Down Move the height adjuster up and down as needed until you hear a click. Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to...
Page 69 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Pregnant women Obtain medical advice and wear the seat belt in the proper way. (→P. 88) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants.
Page 70 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 71 ● If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer.
Page 72 ● Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 73 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP press the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 74 1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. ■ Manual anti-glare inside rear view mirror Normal position Anti-glare position ■ Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.
Page 75 1-3. Adjustable components (seats, mirrors, steering wheel) Type B Turns automatic mode on/off The indicator comes on when automatic mode is turned on. Vehicles without smart key system: The mirror will revert to auto- matic mode each time the engine switch is turned to the “ON”...
Page 76 1-3. Adjustable components (seats, mirrors, steering wheel) ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
Page 77 1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switches. Select a mirror to adjust. STEP Left Right Adjust the mirror. STEP Right Down Left...
Page 78 1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors Push backward to fold the mir- rors. ■ The outside rear view mirrors can be operated when Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with smart key system The “ENGINE START STOP”...
Page 79 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When driving the vehicle Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. ●...
Page 80 1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. Closing One-touch closing (driver’s window only) Opening One-touch opening (driver’s window only) : Pressing the switch in the opposite direction will stop win- dow travel partway.
Page 81 1-4. Opening and closing the windows and moon roof ■ Operating the power windows after turning the engine off Vehicles without smart key system The power windows can be operated for approximately 45 seconds after the engine switch is turned to the “ACC” or “LOCK” position. They cannot, how- ever, be operated once either front door is opened.
Page 82 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after perform- ing the above procedure correctly, have the vehicle inspected by your Toyota dealer. CAUTION ■...
Page 83 1-4. Opening and closing the windows and moon roof ∗ Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Open The moon roof stops slightly before the fully opened posi- tion.
Page 84 1-4. Opening and closing the windows and moon roof ■ The moon roof can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 85 Check to make sure that the moon roof is completely closed and then release the switch. If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer.
Page 86 1-4. Opening and closing the windows and moon roof ■ Sunshade The sunshade can be opened and closed manually. However, the sunshade will open automatically when the moon roof is opened. ■ Moon roof open reminder function (vehicles with multi-information dis- play) Vehicles without smart key system An alarm will sound when the driver’s door is opened with the moon roof not...
Page 87 1-4. Opening and closing the windows and moon roof CAUTION ■ Jam protection function ● Never try jamming any part of your body to activate the jam protection function intentionally. ● The jam protection function may not work if something gets caught just before the moon roof fully closes.
Page 88 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Vehicles without smart key system Turn the engine switch OFF and ensure that all the doors and windows are closed. Vehicles with smart key system Turn the “ENGINE START STOP”...
Page 89 1-5. Refueling Hang the fuel tank cap on the STEP back of the fuel filler door. Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. Once the cap is released, it will turn slightly in the opposite direc- tion.
Page 90 This may cause static electricity to build up, resulting in a possible ignition hazard. ■ When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 91 1-5. Refueling NOTICE ■ Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle's painted surface.
Page 92 1-6. Theft deterrent system ∗ Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicles without navigation system Vehicles without smart key system: The indicator light...
Page 93 1-6. Theft deterrent system Vehicles with navigation system Vehicles without smart key system: The indicator light flashes after the key has been removed from engine switch to indicate that the sys- tem is operating. The indicator light stops flash- ing after the registered key has been inserted into the engine switch to indicate that the system has been can-...
Page 94 1-6. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the key is in contact with a metallic object ● If the key is in close proximity to or touching a key with the security sys- tem (key with a built-in transponder chip) of another vehicle ■...
Page 95 1-6. Theft deterrent system ∗ Alarm The system sounds the alarm and flashes the lights when forcible entry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations when the alarm is set. ● A locked door is unlocked or opened in any way other than using the entry function (vehicles with smart key system) or wireless remote control or mechanical key.
Page 96 1-6. Theft deterrent system Vehicles with navigation system Close the doors, glass hatch and hood, and lock all the doors. The system will be set automatically after 30 sec- onds. The indicator light changes from being on to flashing when the system is set.
Page 97 1-6. Theft deterrent system ■ Triggering of the alarm The alarm may be triggered in the following situations. (Stopping the alarm deactivates the alarm system.) ● A person inside the vehicle opens a door or the hood when the vehicle is locked.
Page 98 1-6. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guar- anteed.
Page 99 1-6. Theft deterrent system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.
Page 100 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (→P. 74) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 101 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 102 1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 103 1-7. Safety information Airbag system components Curtain shield airbags SRS warning light Side airbags Driver airbag Front passenger airbag Driver’s seat position sen- Side and curtain shield air- bag sensors Driver’s seat belt buckle switch Door sensors Driver knee airbag Front airbag sensors Airbag sensor assembly Front passenger’s seat belt...
Page 104 1-7. Safety information The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and an airbag sensor. In certain types of severe frontal or side impacts or vehicle rollover, the SRS airbag system triggers the airbag inflators.
Page 105 1-7. Safety information ■ SRS airbag deployment conditions (front airbags) ● The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approxi- mately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform).
Page 106 1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ●...
Page 107 1-7. Safety information ■ Types of collisions that may not deploy the SRS airbag (side airbags and curtain shield airbags) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a colli- sion to the side of the vehicle body other than the passenger compartment.
Page 108 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or...
Page 109 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts.
Page 110 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
Page 111 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 112 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad or lower portion of the instrument panel. These items can become projectiles when SRS driver, front passenger and knee airbags deploy.
Page 113 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ■ Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer.
Page 114 1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
Page 115 1-7. Safety information Vehicles with navigation system SRS warning light “AIR BAG OFF” indicator light “AIR BAG ON” indicator light Front passenger's seat belt reminder light...
Page 116 1-7. Safety information Conditions and operation of the front passenger occupant classification system ■ Adult* “AIR BAG ON” and “AIR BAG OFF” indi- “AIR BAG cator lights ON” Indicator/ SRS warning light warning light Front passenger's seat belt reminder Flashing* light Front passenger airbag Side airbag on the front passenger seat...
Page 117 1-7. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” indi- Not illumi- cator lights nated Indicator/ SRS warning light warning light Front passenger's seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Devices Activated Curtain shield airbag in the front passen-...
Page 118 1-7. Safety information : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P. 143) : In case the indicator is not illuminated, consult this manual as for installing the child restraint system properly.
Page 119 1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions Observe the following precautions regarding front passenger occupant clas- sification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger's seat belt tab has not been left inserted into the buckle before someone sits in the front passenger seat.
Page 120 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 121 1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 122 1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat...
Page 123 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 124 1-7. Safety information CAUTION ■ Child restraint precautions ● A forward-facing child restraint system may be allowed to be installed on the front passenger seat only when it is unavoidable. A child restraint sys- tem that requires a top tether strap should not be used in the front passen- ger seat since there is no top tether strap anchor for the front passenger seat.
Page 125 1-7. Safety information CAUTION ■ When the child restraint system is not in use ● Keep the child restraint system properly secured on the seat even if it is not in use. Do not store the restraint unsecured in the passenger compartment. ●...
Page 126 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 127 1-7. Safety information Second seat: Anchor brackets (for top tether strap) Anchor brackets are provided for the second seats.
Page 128 1-7. Safety information Installation with LATCH system Fold the seatback while pulling STEP the lever. Return the seatback and secure it at the 1st lock posi- tion (most upright position). Adjust the seatback to the 3rd lock position. (→P. 77) 1st lock position 3rd lock position Type A...
Page 129 1-7. Safety information Type B Latch the buckles onto the STEP LATCH anchors. The bars are installed in the clearance between the seat cush- ion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchors.
Page 130 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing ⎯ Infant seat/convertible seat ■ Place the child seat on the rear STEP seat facing the rear of the vehi- cle. Run the seat belt through the STEP child seat and insert the plate into the buckle.
Page 131 1-7. Safety information While pushing the child seat STEP down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 132 1-7. Safety information While pushing the child seat into STEP the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 133 1-7. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap (second seat only) Secure the child restraint using STEP the seat belt or lower anchors, and adjust the head restraint to the upmost position.
Page 134 1-7. Safety information Outer seat: Open the anchor STEP bracket cover, latch the hook onto the anchor bracket and tighten the top tether strap. Center seat: Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.
Page 135 1-7. Safety information CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode. (→P. 89) ALR mode causes the belt to tighten only which could cause injury or dis- comfort to the child.
Page 136 1-7. Safety information CAUTION ■ When installing a child restraint system ● When installing a child restraint system in the rear center seat, adjust both seat cushions to the same position and align seatbacks at the same angle. The seatbacks must be adjusted to the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries in the event of sudden braking, sudden swerving or an accident.
Page 137 1-7. Safety information...
Page 138 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine →P. 170, 174 ■ Driving STEP With the brake pedal depressed, shift the shift lever to D. (→P. 177) STEP Release the parking brake.
Page 139 Drum-in-disc type parking brake system Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodi- cally or whenever the parking brake shoes and/or drums are replaced. Have your Toyota dealer perform the bedding-down.
Page 140 If the smell of exhaust is noticed inside the vehicle, open the windows and check that the back door is closed. Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately.
Page 141 2-1. Driving procedures CAUTION ● Do not shift the shift lever to P while the vehicle is moving. Doing so can damage the transmission and may result in a loss of vehicle control. ● Do not shift the shift lever to R while the vehicle is moving forward. Doing so can damage the transmission and may result in a loss of vehicle control.
Page 142 2-1. Driving procedures CAUTION ● 4WD models: Do not drive across a river or through other bodies of water. This may cause electric/electronic components to short circuit, damage the engine or cause other serious damage to the vehicle. ● Do not drive in excess of the speed limit. Even if the legal speed limit per- mits it, do not drive over 85 mph (140 km/h) unless your vehicle has high- speed capability tires.
Page 143 2-1. Driving procedures CAUTION ● In order to prevent accidents due to the vehicle rolling away, always keep depressing the brake pedal while the engine is running, and apply the parking brake as necessary. ● If the vehicle is stopped on an incline, in order to prevent accidents caused by the vehicle rolling forward or backward, always depress the brake pedal and securely apply the parking brake as needed.
Page 144 The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 145 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage can result if the pads are not replaced when needed.
Page 146 2-1. Driving procedures CAUTION ■ If you get a flat tire while driving A flat or damaged tire may cause the following situations. Hold the steering wheel firmly and gradually press the brake pedal to slow down the vehicle. ● It may be difficult to control your vehicle.
Page 147 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following. ● Brake function ●...
Page 148 2-1. Driving procedures Engine (ignition) switch (vehicles with smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch mode. ■ Starting the engine The engine can be started in any mode by operating the “ENGINE START STOP”...
Page 149 2-1. Driving procedures ■ Changing “ENGINE START STOP” switch modes Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.) OFF* The emergency flashers can be used.
Page 150 ■ When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ Auto power off function If the vehicle is left in ACCESSORY mode for more than an hour with the shift lever in P, the “ENGINE START STOP”...
Page 151 2-1. Driving procedures CAUTION ■ When starting the engine Always start the engine while sitting in the driver's seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■...
Page 152 2-1. Driving procedures Engine (ignition) switch (vehicles without smart key system) ■ Starting the engine STEP Check that the parking brake is set. STEP Check that the shift lever is set in P. STEP Sit in the driver’s seat and firmly depress the brake pedal. STEP Turn the engine switch to the “START”...
Page 153 2-1. Driving procedures ■ Turning the key from “ACC” to “LOCK” STEP Shift the shift lever to P. (→P. 177) STEP Push in the key and turn to the “LOCK” position. ■ Steering lock release When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 154 2-1. Driving procedures NOTICE ■ To prevent battery discharge Do not leave the key in the “ACC” or “ON” position for long periods if the engine is not running. ■ When starting the engine ● Do not crank for more than 30 seconds at a time. This may overheat the starter and wiring systems.
Page 155 2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Vehicles without smart key system While the engine switch is in “ON” position, depress the brake pedal and move the shift lever. Vehicles with smart key system While the “ENGINE START STOP”...
Page 156 2-1. Driving procedures ■ Shift position uses Shift position Function Parking the vehicle or starting the engine Reversing Neutral Normal driving S mode driving (→P. 179) : Shifting to the D position allows the system to select a gear suitable for the driving conditions.
Page 157 2-1. Driving procedures Changing shift ranges in S mode Shift the shift lever to the S position and operate the shift lever. Upshifting Downshifting 2.7 L 4-cylinder (1AR-FE) engine The initial shift range in S mode is set automatically to “5” or “4” according to the vehicle speed.
Page 158 2-1. Driving procedures ■ Shift ranges and their functions Function Shift range 2.7 L 4-cylinder (1AR-FE) 3.5 L V6 (2GR-FE) engine engine Automatically selecting gears between 1 and 6 ⎯ according to vehicle speed and driving conditions. Automatically selecting gears between 1 and 5 according to vehicle speed and driving conditions.
Page 159 If the S indicator does not come on even after shifting the shift lever to This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the vehicle will operate as if the shift lever is in D.) ■...
Page 160 2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 161 2-1. Driving procedures Parking brake Sets the parking brake* (Depressing the pedal again U.S.A. Canada releases the parking brake.) *: Fully depress parking brake pedal with your left foot while depressing the brake pedal with your right foot. ■ Usage in winter time See “Winter driving tips”...
Page 162 2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
Page 163 2-2. Instrument cluster Gauges and meters Vehicles without smart key system The following gauges and meters illuminate when the engine switch is in the “ON” position. Vehicles with smart key system The following gauges and meters illuminate when the “ENGINE START STOP”...
Page 164 2-2. Instrument cluster Odometer/Trip meter Odometer Displays the total distance the vehicle has been driven. Trip meter Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
Page 165 2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel (vehicles without navigation system)
Page 166 2-2. Instrument cluster Center panel (vehicles with navigation system) ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Headlight indicator (→P. 182) (→P. 200) (U.S.A.) Headlight high beam Tail light indicator indicator (→P.
Page 167 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details. : The light flashes to indicate that the system is operating.
Page 168 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 169 2-2. Instrument cluster ∗ Multi-information display The multi-information display presents the driver with a variety of driving-related data, including the current outside temperature and clock. ● Outside temperature Indicates the outside tempera- ture. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C).
Page 170 2-2. Instrument cluster ● Warning messages (→P. 539) Automatically displayed when a malfunction occurs in one of the vehicle’s systems. Trip information Push the “DISP” button to dis- play trip information. Display items can be switched by pressing the “DISP” button. ■...
Page 171 2-2. Instrument cluster ■ Cruising range Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. • This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
Page 172 2-2. Instrument cluster Setting up the displays Display the set up screen on the STEP multi-information display when the vehicle is stopped. Press and hold the “DISP” button to display the set up screen. Select the desired item on the STEP menu screen.
Page 173 2-2. Instrument cluster Press the “DISP” button to adjust STEP the minutes. After adjusting the minutes, wait 5 seconds to allow the minutes to be automatically input. ■ Setting the display STEP Select “DISPLAY” on the menu screen. Press and hold the “DISP”...
Page 174 2-2. Instrument cluster ● Setting the brightness STEP Select “BRIGHTNESS” on the menu screen. Press and hold the “DISP” button until the display changes. Press the “DISP” button to adjust STEP the brightness. +: Brighter -: Darker After adjusting the brightness, wait 5 seconds to allow the bright- ness to be automatically input.
Page 175 2-2. Instrument cluster Setting up the rear view monitor display Display the set up screen on the STEP multi-information display when the vehicle is stopped and the rear view monitor is turned on. Press and hold the “DISP” button to display the set up screen. Select the desired item on the STEP menu screen.
Page 176 2-2. Instrument cluster ■ Setting the contrast STEP Select “CONTRAST” on the menu screen. Press and hold the “DISP” button until the display changes. Press the “DISP” button to adjust STEP the contrast. +: Strengthen -: Weaken After adjusting the contrast, wait 5 seconds to allow the contrast to be automatically input.
Page 177 When stopped, or driving at low speeds (less than 12 mph [20 km/h]), the correct outside temperature may not be displayed, or the display may take longer than normal to change. ■ Customization that can be configured at Toyota dealer Setting of language selection can be changed. (Customizable features →P. 602) NOTICE ■...
Page 178 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Type A The daytime running lights turn on. The side marker, park- ing, tail, license plate, daytime running lights and instrument panel lights turn on. U.S.A.
Page 179 2-3. Operating the lights and wipers Type B The headlights and parking lights turn on (if equipped) and off automatically. (Vehicles without smart key system: When engine switch is turned to the “ON” position. Vehicles with smart key system: When the “ENGINE START STOP”...
Page 180 2-3. Operating the lights and wipers Type C The headlights and parking lights turn on (if equipped) and off automatically. (Vehicles without smart key system: When engine switch is turned to the “ON” position. Vehicles with smart key system: When the “ENGINE START STOP”...
Page 181 2-3. Operating the lights and wipers Type D The daytime running lights turn on. The side marker, park- ing, tail, license plate, daytime running lights and instrument panel lights turn on. The headlights and all lights listed above (except daytime run- ning lights) turn on.
Page 182 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams.
Page 183 To turn the lights on again, turn the “ENGINE START STOP” switch to IGNI- TION ON mode, or turn the light switch off and then back to ■ Customization that can be configured at Toyota dealer Settings (e.g. daytime running light system) can be changed. (Customizable features →P. 602) NOTICE ■...
Page 184 2-3. Operating the lights and wipers ∗ Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on in low beam. Type A Front fog lights on ∗...
Page 185 2-3. Operating the lights and wipers Type B Front fog lights on...
Page 186 2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation. Type A Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency...
Page 187 2-3. Operating the lights and wipers Type B Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency...
Page 188 2-3. Operating the lights and wipers ■ Wash/wipe operation Wipers operate automatically. ■ The windshield wipers and washer can be operated when Vehicles without smart key system the “ON” position. The engine switch is in Vehicles with smart key system The “ENGINE START STOP”...
Page 189 2-3. Operating the lights and wipers NOTICE ■ When the windshield is dry Do not use the wipers, as they may damage the windshield. ■ When there is no washer fluid spray from the nozzle Damage to the washer fluid pump may be caused if the lever is pulled toward you and held continually.
Page 190 2-3. Operating the lights and wipers Rear window wiper and washer Type A Intermittent window wiper operation Normal window wiper oper- ation Washer/wiper dual opera- tion Washer/wiper dual opera- tion...
Page 191 2-3. Operating the lights and wipers Type B Intermittent window wiper operation Normal window wiper oper- ation Washer/wiper dual opera- tion Washer/wiper dual opera- tion...
Page 192 2-3. Operating the lights and wipers ■ The rear window wiper and washer can be operated when Vehicles without smart key system the “ON” position. The engine switch is in Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. NOTICE ■...
Page 193 2-4. Using other driving systems ∗ Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicator Cruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button to STEP activate the cruise control. Cruise control indicator will come on.
Page 194 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 195 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer.
Page 196 2-4. Using other driving systems CAUTION ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 197 2-4. Using other driving systems Rear view monitor system (vehicles with multi-information display) Vehicles with navigation system Refer to the “Navigation System Owner's Manual”. Vehicles without navigation system The rear view monitor system assists the driver by displaying an image of the area behind the vehicle. The image is displayed in reverse on the screen.
Page 198 2-4. Using other driving systems ■ Displayed area The area covered by the camera is lim- ited. Objects that are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the screen may vary according to vehicle orientation or road conditions.
Page 199 2-4. Using other driving systems ■ Smear effect If a bright light, such as sunlight reflected off the vehicle body, is picked up by the camera, a smear effect* char- acteristic to the camera may occur. *: Smear effect: A phenomenon that occurs when a bright light is picked up by the camera;...
Page 200 When washing the vehicle, do not apply intensive bursts of water to the camera or camera area. Doing so may result in the camera malfunction- ing. ● When replacing tires, please consult your Toyota dealer. If you replace the tires, the area displayed on the screen may change.
Page 201 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 202 2-4. Using other driving systems When the Enhanced VSC/TRAC systems are operating If the vehicle is in danger of slip- ping, rolling backwards when starting on an incline, or the front wheels (2WD models) or four wheels (4WD models) spin, the indicator flashes to indicate that the Enhanced VSC/TRAC sys- tems have been engaged.
Page 203 When the “TRAC OFF” indicator light comes on even if the Enhanced VSC/TRAC off switch has not been pressed TRAC, hill-start assist control and downhill assist control cannot be oper- ated. Contact your Toyota dealer. ■ Automatic reactivation of TRAC and Enhanced VSC...
Page 204 10 minutes. ■ If the slip indicator comes on... It may indicate a malfunction in the Enhanced VSC and TRAC. Contact your Toyota dealer. CAUTION ■ The ABS does not operate effectively when ●...
Page 205 The ABS and Enhanced VSC systems will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause the system to malfunction.
Page 206 2-4. Using other driving systems Hill-start assist control Hill-start assist control helps to prevent the vehicle from rolling backwards when starting on an incline or slippery slope. To engage hill-start assist con- trol, further depress the brake pedal when the vehicle is stopped completely.
Page 207 • The brake pedal is depressed again. • The brake pedal has been depressed for more than approximately 3 minutes. ■ If the slip indicator comes on... It may indicate a malfunction in the system. Contact your Toyota dealer. CAUTION ■ Hill-start assist control ●...
Page 208 2-4. Using other driving systems Downhill assist control system (4WD models) With the downhill assist control system, the vehicle is able to descend a steep hill, maintaining a constant low speed of about 3 mph (5 km/h) without brake pedal operation. ■...
Page 209 Refrain from using the system until the downhill assist control system indicator stays on. (There is no problem with continuing to drive normally.) ■ If the slip indicator comes on... It may indicate a malfunction in the system. Contact your Toyota dealer.
Page 210 2-4. Using other driving systems CAUTION ■ Conditions which may affect the downhill assist control system opera- tion ● Do not rely too heavily on the downhill assist control system. On extremely steep inclines, icy surfaces or muddy roads, the vehicle may slip and the system may not be able to maintain the constant low vehicle speed of about 3 mph (5 km/h), leading to an accident causing death or serious injury.
Page 211 2-5. Driving information Off-road precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity to make it capable of performing in a wide variety of off-road applications.
Page 212 2-5. Driving information CAUTION ■ Off-road vehicle precautions Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt.
Page 213 2-5. Driving information Off-road driving When driving your vehicle off-road, please observe the following pre- cautions to ensure your driving enjoyment and to help prevent the closure of areas to off-road vehicles. ● Drive your vehicle only in areas where off-road vehicles are permit- ted to travel.
Page 214 2-5. Driving information CAUTION ■ Off-road driving precautions Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: ● Drive carefully when off the road. Do not take unnecessary risks by driving in dangerous places.
Page 215 2-5. Driving information NOTICE ■ When you drive through water If driving through water, such as when crossing shallow streams, first check the depth of the water and the bottom of the river bed for firmness. Drive slowly and avoid deep water. ■...
Page 216 2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment whenever possible. Be sure all items are secured in place. ● Be careful to keep the vehicle level. Placing the weight as far for- ward as possible helps maintain vehicle balance.
Page 217 2-5. Driving information (6)If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Example on your vehicle Cargo capacity Total load capacity When 2 people with the combined weight of 366 lb.
Page 218 2-5. Driving information CAUTION ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment. ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury.
Page 219 Roof luggage carrier precautions (if equipped) To use the roof rails as a roof luggage carrier, you must fit the roof rails with two or more genuine Toyota cross rails or their equivalent. When you load cargo on the roof luggage carrier, observe the following: ●...
Page 220 2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, trailer weight rating and cargo capacity. ■ Total load capacity: 1200 lb. (544 kg) Total load capacity means the combined weight of occupants, cargo and luggage. ■...
Page 221 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 222 2-5. Driving information ■ When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. ■ When parking the vehicle Park the vehicle and move the shift lever to P without setting the parking brake.
Page 223 2-5. Driving information ■ Tire chains Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires. ● Install tire chains following the instructions provided in the accompanying manual.
Page 224 NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 225 To tow a trailer safely, use extreme care and drive the vehicle in accordance with your trailer’s characteristics and operating condi- tions. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional requirements such as towing kits, etc.
Page 226 2-5. Driving information ■ GVWR (Gross Vehicle Weight Rating) The maximum allowable gross vehicle weight. The gross vehicle weight is the total weight of the vehicle. When towing a trailer, it is the sum of the vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the tongue weight.
Page 227 2-5. Driving information ■ TWR (Trailer Weight Rating) The maximum allowable gross (With brakes) trailer weight. The gross trailer weight is the sum of the trailer weight and the weight of the cargo in the trailer. TWR is calculated assuming base vehicle with one driver, one front passenger, towing package (if available), hitch and hitch sys-...
Page 228 2-5. Driving information ■ Tongue Weight The load placed on the trailer hitch ball. (→P. 252) Weight limits ● The gross trailer weight must never exceed the TWR described in the table. (→P. 251) ● The gross combination weight must never exceed the GCWR described in the table.
Page 229 2-5. Driving information GCWR, TWR, Unbraked TWR Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. ■ GCWR and TWR Driving Model code Engine GCWR system 9840 lb.
Page 230 2-5. Driving information Trailer Tongue Weight ● A recommended tongue weight varies in accordance with the types of trailers or towing as described below. ● To ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. •...
Page 231 Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight require- ment of your vehicle.
Page 232 2-5. Driving information Selecting trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer coupler. Most couplers stamped with the required trailer ball size.
Page 233 2-5. Driving information Positions for towing hitch receiver and hitch ball Weight carrying ball position: 48.1 in. (1221 mm) Connecting trailer lights Use the wire harness stored in the rear end under body.
Page 234 ● Speed limits for towing a trailer vary by state or province. Do not exceed the posted towing speed limit. ● Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road. Do not exceed this limit, the posted towing speed limit or the speed limit for your trailer as set forth in your trailer owner’s manual, whichever is lowest.
Page 235 2-5. Driving information ● Avoid jerky starts or sudden acceleration. ● Avoid jerky steering and sharp turns, and slow down before mak- ing a turn. ● Note that when making a turn, the trailer wheels will be closer than the vehicle wheels to the inside of the turn. Compensate by making a wider than normal turning radius.
Page 236 2-5. Driving information ● Always place wheel blocks under both the vehicle’s and the trailer’s wheels when parking. Apply the parking brake firmly, and put the transmission in P. Avoid parking on a slope, but if unavoid- able, do so only after performing the following: STEP Apply the brakes and keep them applied.
Page 237 2-5. Driving information ■ Matching trailer ball height to trailer coupler height No matter which class of tow hitch applies, for a more safe trailer hookup, the trailer ball setup must be the proper height for the coupler on the trailer. Coupler Trailer ball ■...
Page 238 Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential or wheel bearing), Toyota rec- ommends that you do not tow a trailer until the vehicle has been driven for over 500 miles (800 km).
Page 239 2-5. Driving information ■ If trailer sway occurs One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. ● If trailer swaying occurs: • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel.
Page 240 2-5. Driving information CAUTION ■ To avoid accident or injury ● Do not exceed the TWR, unbraked TWR, GCWR, GVWR or GAWR. ● If the gross trailer weight is over 2000 lb. (907 kg), a sway control device with sufficient capacity is required. ●...
Page 241 ■ When towing a trailer Toyota recommends trailers with brakes that conform to any applicable fed- eral and state/provincial regulations. ● If the gross trailer weight exceeds unbraked TWR, trailer brakes are required.
Page 242 2-5. Driving information NOTICE ■ When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ■ Safety chain A safety chain must always be used between the towing vehicle and the trailer.
Page 243 2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with 4 wheels on the ground.
Page 244 3-1. Using the air conditioning system and defogger ∗ Front manual air conditioning system Temperature control dial Fan speed control dial Outside air or recirculated air mode Air outlet selection dial Rear air conditioning Air conditioning on/off switch on/off switch (if equipped) Adjusting the settings ■...
Page 245 3-1. Using the air conditioning system and defogger ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter- clockwise (decrease). Turn the dial to “OFF” to turn the fan off. ■ Changing the air outlets Set the air outlet selection dial to an appropriate position.
Page 246 3-1. Using the air conditioning system and defogger Feet : Vehicles without rear air conditioning system Without rear air conditioning system Feet and windshield Recirculated air mode may auto- matically switch to outside air mode. With rear air conditioning system Feet and windshield Recirculated air mode may auto- matically switch to outside air...
Page 247 3-1. Using the air conditioning system and defogger ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (indicator off) and recircu- lated air mode (indicator on) modes each time is pressed. Defogging the windshield Set the air outlet selection dial to position.
Page 248 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Front center outlets Direct air flow to the left or right, up or down. Front side outlets Direct air flow to the left or right, up or down.
Page 249 There may be a problem in the air conditioning system if the indi- cator light continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. ■ When...
Page 250 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not set the air outlet selection dial to during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 251 3-1. Using the air conditioning system and defogger ∗ Front automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Control panel Rear air conditioning Temperature control on/off switch for rear passengers Fan speed Windshield defogger Outside air or recirculated...
Page 252 3-1. Using the air conditioning system and defogger Multi-information display Airflow display Fan speed display Driver’s side Front passenger’s side temperature Temperature setting display temperature setting display setting for rear passengers display Using the automatic mode STEP Press The air conditioning system begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting.
Page 253 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). The air conditioning system switches between individual and simultaneous modes each time (without rear air conditioning system) or (with rear air conditioning system) is pressed.
Page 254 3-1. Using the air conditioning system and defogger ■ Changing the air outlets Press The air outlets switch each time either side of is pressed. The air flow shown on the display indicates the following. Upper body : Vehicles without rear air conditioning system Upper body and feet : Vehicles without rear air conditioning system Feet...
Page 255 3-1. Using the air conditioning system and defogger Without rear air conditioning system Feet and windshield Recirculated air mode may auto- matically switch to outside air mode. With rear air conditioning system Feet and windshield Recirculated air mode may auto- matically switch to outside air mode.
Page 256 3-1. Using the air conditioning system and defogger Changing the rear seat settings (if equipped) ■ Adjusting the temperature setting Press “∧” on to increase the temperature and “∨” to decrease the temperature. The air conditioning system switches between individual and simultaneous modes each time is pressed.
Page 257 3-1. Using the air conditioning system and defogger Front side outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. Rear center outlets (vehicles without rear air conditioning system) Direct air flow to the left or right, up or down.
Page 258 3-1. Using the air conditioning system and defogger ■ Switching between outside air and recirculated air modes Recirculated air mode or outside air mode may be automatically switched to in accordance with the temperature setting and the inside temperature. ■ Window defogger feature Recirculated air mode may automatically switch to (outside air) mode...
Page 259 3-1. Using the air conditioning system and defogger ∗ Rear manual air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Changes the air outlets used Fan speed control dial Temperature control dial ∗ : If equipped...
Page 260 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). ■ Changing the air outlets Press the desired Air flows as shown below according to the mode selected. Upper body Upper body and feet...
Page 261 3-1. Using the air conditioning system and defogger Feet ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter- clockwise (decrease). Adjusting the position of and opening and closing the roof side air outlets Direct air flow to the left or right, up or down.
Page 262 3-1. Using the air conditioning system and defogger ∗ Rear automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Fan speed display Airflow display Temperature setting display Temperature Fan speed control dial control dial Changes the air Automatic mode outlets used...
Page 263 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). ■ Changing the air outlets Press The air outlets change as follows each time is pressed.
Page 264 3-1. Using the air conditioning system and defogger Feet ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter- clockwise (decrease). Press to turn the fan off. Adjusting the position of and opening and closing the roof side air outlets Direct air flow to the left or right, up or down.
Page 265 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Clear the rear window using the defogger. Vehicles with manual air conditioning system On/off Press the button to turn on the rear window defogger. The indicator light will come on.
Page 266 3-1. Using the air conditioning system and defogger ■ The defogger can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 267 3-1. Using the air conditioning system and defogger ∗ Windshield wiper de-icer This feature is used to prevent ice from building up on the wind- shield and wiper blades. On/off Press the button to turn on the windshield wiper de-icer. The indicator light will come on.
Page 268 3-1. Using the air conditioning system and defogger ∗ Using the steering wheel climate remote control switches Some air conditioning features can be controlled using the switches on the steering wheel. Temperature control Automatic mode Using the automatic mode STEP Press The air conditioning system will operate, and air outlets and fan speed will be set automatically.
Page 269 3-2. Using the audio system Audio system With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Without navigation system Type A: CD player and AM/FM radio Type B: CD player and AM/FM radio (with CD changer controller)
Page 270: Table Of Contents
3-2. Using the audio system Type C: CD player with changer and AM/FM radio Title Page Using the radio P. 297 Using the CD player P. 304 Playing back MP3 and WMA discs P. 312 Operating an iPod P. 320 Operating a USB memory P.
Page 271 3-2. Using the audio system Language settings (type B and C) The language used for all voice guidance, voice recognition and mes- sages may be changed. STEP Press STEP Press (MORE). STEP Press (LANG). STEP Press the that corresponds to the desired language. For vehicles sold in the U.S.A.
Page 272 3-2. Using the audio system CAUTION ■ For vehicles sold in U.S.A. and Canada ● Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. ●...
Page 273: Using The Radio
3-2. Using the audio system Using the radio Type A Power Volume Scanning for receivable stations Station selector Mute Adjusting the frequency Seeking the AM/FM frequency mode buttons Changing the program type Type B and C Adjusting the frequency Power Volume Scanning for (AM, FM mode) or...
Page 274 3-2. Using the audio system ® Setting station presets (excluding XM Satellite Radio) STEP Search for desired stations by turning , or ∧ pressing “ ” or “∨” on STEP Press and hold the button (from ) the station is to be set to until you hear a beep. Type B and C: Each time is pressed, station pages are changed.
Page 275 3-2. Using the audio system ® Satellite Radio (type B and C) ® ■ Satellite Radio Receiving XM STEP Press The display changes as follows each time is pressed. AM → FM → XM STEP Turn to select the desired channel in all the categories, or press “∧”...
Page 276 3-2. Using the audio system ■ Displaying text information Press Each time is pressed, the display changes in the following order: Title (song/program title) → Name (artist name/feature)/Title (song/pro- gram title). Silencing the sound Type A Press Type B and C Press...
Page 277 3-2. Using the audio system ■ When the battery is disconnected All preset stations are erased. (type A only) ■ Reception sensitivity Type B and C ⎯ Cargo loaded on the roof luggage carrier, especially ● ® metal objects, may adversely affect the reception of XM Satellite Radio.
Page 278 ANTENNA securely. CHECK There is a short-circuit in the antenna or the sur- ANTENNA rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to the XM Satellite Radio. The radio is being updated with the latest ®...
Page 279 3-2. Using the audio system The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to CHANNEL NOT the previous channel or “CH001”. If it does not AVAILABLE change automatically, select another channel. ®...
Page 280: Using The Cd Player
3-2. Using the audio system Using the CD player Type A Power Volume CD eject Reverse Displaying text message Search playback Fast-forward CD slot Mute Playback Repeat play Random playback Track selection Type B and C Selecting a track Power Volume Searching Displaying text messages...
Page 281 3-2. Using the audio system Loading CDs ■ Loading a CD Type A and B Insert a CD. Type C STEP Press STEP When the indicator on the slot turns from amber to green, insert a CD. ■ Loading multiple CDs (type C only) STEP Press and hold until you hear a beep.
Page 282 3-2. Using the audio system Ejecting CDs ■ Ejecting a CD Type A and B Press and remove the CD. Type C STEP To select the CD to be ejected, press ) or The selected CD number is shown on the display. STEP Press and remove the CD.
Page 283 3-2. Using the audio system Selecting a CD (type B with a CD changer and type C) ■ Selecting a CD to play Press ) or ■ Scanning loaded CDs STEP Press and hold until you hear a beep. The first ten seconds of the first track on each CD will be played. To cancel, press again.
Page 284 3-2. Using the audio system Repeat play ■ Repeating a track Press (RPT) or (RPT). To cancel, press the button once more (type A and type B without a CD changer), or twice more (type B with a CD changer and type C). ■...
Page 285 “WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. ■ Discs that can be used Discs with the marks shown below can be used.
Page 286 3-2. Using the audio system ■ Lens cleaners Do not use lens cleaners. Doing so may damage the CD player. NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Disc.
Page 287 3-2. Using the audio system NOTICE ● CDs with a transparent or translucent recording area ● CDs that have had tape, stickers or CD- R labels attached to them, or that have had the label peeled off ■ CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself.
Page 288: Playing Back Mp3 And Wma Discs
3-2. Using the audio system Playing back MP3 and WMA discs Type A Power Volume Fast-forward CD eject Reverse Displaying text message Search playback CD slot Mute File selection Playback Folder selection Repeat play File selection Random playback Type B and C Selecting a file Power Volume...
Page 289 3-2. Using the audio system Loading and ejecting MP3 and WMA discs →P. 304 Selecting MP3 and WMA discs (type B with a CD changer and type C) →P. 307 Selecting and scanning a folder ■ Selecting folders one at a time Press “∧”...
Page 290 3-2. Using the audio system Fast-forwarding and reversing files ∧ To fast-forward or reverse, press and hold “ ” or “∨” on Playing and pausing files (type B and C) Press Random playback ■ Playing files from a particular folder in random order Press (RAND) or (RDM).
Page 291 3-2. Using the audio system Repeat play ■ Repeating a file Press (RPT) or (RPT). To cancel, press the button once more (type A and type B without a CD changer), or twice more (type B with a CD changer and type C). ■...
Page 292 “WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played. ■ Discs that can be used →P. 309 ■...
Page 293 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 294 3-2. Using the audio system ● Compatible disc formats The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2 CD-ROM XA Mode 2, Form 1 and Form 2 • File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet) MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.
Page 295 3-2. Using the audio system ● Extensions If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
Page 296: Operating An Ipod
3-2. Using the audio system ∗ Operating an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod STEP Open the cover and connect an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on. Vehicles without seat heater Vehicles with seat heater ∗...
Page 297 3-2. Using the audio system Press STEP ■ Control panel Power Volume Selector knob Displaying text messages Selector buttons Selecting a track/ Playback/pause fast-forwarding and rewinding Playback...
Page 298 3-2. Using the audio system Selecting a play mode STEP Press (BROWSE) to select iPod menu mode. STEP Press that corresponds to the desired play mode. Pressing (MORE) to change to the second selection list. ■ Play mode list First Second Third Fourth...
Page 299 3-2. Using the audio system ■ Selecting a list STEP Turn to display the first selection list. STEP Press to select the desired item. STEP Repeat the same procedure to select the desired song name. To return to the previous selection list, press Selecting songs from a song list STEP Press...
Page 300 3-2. Using the audio system Selecting songs Turn or press “∧” or “∨” on to select the desired song. Playing and pausing songs Press Fast-forwarding and rewinding songs ∧ Press and hold “ ” or “∨” on Shuffle playback ■ Playing songs from one playlist or album in random order Press (RDM).
Page 301 3-2. Using the audio system Switching the display Press Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time ■ About iPod ● Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Page 302 3-2. Using the audio system ■ Compatible models Model Generation Software version iPod 5th generation Ver. 1.2.0 or higher iPod nano 1st generation Ver. 1.3.0 or higher 2nd generation Ver. 1.1.2 or higher 3rd generation Ver. 1.0.0 or higher iPod touch 1st generation Ver.
Page 303: Operating A Usb Memory
3-2. Using the audio system ∗ Operating a USB memory Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory STEP Open the cover and connect a USB memory. Turn on the power of the USB memory if it is not turned on. Vehicles without seat heater Vehicles with seat heater ∗...
Page 304 3-2. Using the audio system Press STEP ■ Control panel Selector knob Power Volume Displaying text Searching messages playback Selector buttons Selecting a Selecting a track/ folder and file fast-forwarding Playback/pause and rewinding Playback...
Page 305 3-2. Using the audio system Selecting and scanning a folder ■ Selecting a folder Press “∧” or “∨” on to select the desired folder. ■ Returning to the first file of the first folder Press and hold “∨” on until you hear a beep. ■...
Page 306 3-2. Using the audio system Fast-forwarding and rewinding files ∧ Press and hold “ ” or “∨” on Random playback ■ Playing files from a folder in random order Press (RDM). To cancel, press the button twice. ■ Playing all the files from a USB memory in random order Press (RDM) twice.
Page 307 3-2. Using the audio system ■ USB memory functions Depending on the USB memory that is connected to the system, certain functions may not be available. Disconnecting the device and reconnecting it once again may resolve some malfunctions. ■ Error messages “USB ERROR”: This indicates a problem either in the USB memory or inside the USB box or connection between them.
Page 308 3-2. Using the audio system ● MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 309 3-2. Using the audio system ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3 tags.
Page 310 3-2. Using the audio system NOTICE ■ To prevent damage to a USB memory ● Do not leave a USB memory in the vehicle. The temperature inside may become high, resulting in damage to the player. ● Do not push down on or apply unnecessary pressure to the USB memory while it is connected as this may damage the USB memory or its terminal.
Page 311: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Type A Adjusting the sound quality and ASL Type B and C Adjusting the sound quality and ASL Selector buttons Menu button...
Page 312 3-2. Using the audio system Using the audio control function ■ Changing sound quality modes Type A Pressing selects the mode to be changed in the following order. “BAS”→“TRE”→“FAD”→“BAL”→“ASL”→“RSE”* *: Vehicles with rear seat entertainment system Type B and C STEP Press STEP...
Page 313 3-2. Using the audio system Type B and C Mode Sound qual- Turn to the Turn to the Level displayed ity mode left right BASS Bass* -5 to 5 Mid-range* -5 to 5 High (type C only) TREB Treble* -5 to 5 Front/rear Shifts to FADE...
Page 314 3-2. Using the audio system Type B and C STEP Press STEP Press (MORE). STEP Press (ASL). STEP Press the that corresponds to the desired mode. Type B: “LOW”, “MID”, “HIGH”, or “OFF” Type C: “ON” or “OFF” ASL automatically adjusts the volume and tone quality according to vehicle speed.
Page 315: Using The Aux Port
3-2. Using the audio system Using the AUX port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. STEP Open the cover and connect the portable audio device. Vehicles without seat heater (type A) Vehicles without seat heater (type B and C) Vehicles with seat heater...
Page 316 3-2. Using the audio system Type A Press STEP Type B and C Press STEP ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself. ■...
Page 317: Using The Steering Wheel Audio Switches
3-2. Using the audio system ∗ Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Volume Radio mode: Selects radio stations CD mode: Selects tracks, files (MP3 and WMA) and discs (type C only) iPod mode: Selects songs USB memory mode:...
Page 318 3-2. Using the audio system Changing the audio source Press when the audio system is turned on. The audio source changes as follows each time is pressed. Type A FM→CD→AUX→AM Type B and C FM→SAT→CD (type B only)→CD changer (with a CD changer) →Bluetooth ®...
Page 319 3-2. Using the audio system Selecting a disc in the CD player (CD player with changer only) STEP Press to select CD mode. STEP Press and hold “∧” or “∨” on until you hear a beep. CAUTION ■ To reduce the risk of an accident Exercise care when operating the audio switches on the steering wheel.
Page 320 3-2. Using the audio system ∗ Detachable pole antenna The antenna can be removed. ■ Removing the antenna Place the included wrench STEP around the antenna. When not in use, the wrench is stored in glove box. Loosen the antenna with the STEP wrench and remove it.
Page 321 3-2. Using the audio system ■ Installing the antenna Tighten the antenna by one STEP hand until it will not turn any more. Using the wrench, tighten the STEP antenna an additional 1/8th turn (20 to 45 degrees) to secure it in place. After tightening the antenna, remove the wrench.
Page 322 3-2. Using the audio system NOTICE ■ To avoid damaging the antenna Remove the antenna in the following situations. ● When using an automatic carwash. ● When the antenna will touch the ceiling of a garage, etc. ● When covering the vehicle with a car cover. ■...
Page 323 ® 3-3. Using the Bluetooth audio system ® ∗ Bluetooth audio system ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. ® This audio system supports Bluetooth , a wireless data system capable of playing portable audio music without cables.
Page 324 ® 3-3. Using the Bluetooth audio system ■ When transferring ownership of the vehicle Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 387) ® ■ About Bluetooth Bluetooth is a registered trademark of Bluetooth SIG.
Page 325 ® 3-3. Using the Bluetooth audio system CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
Page 326 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system ■ Audio unit Display Track title, Artist name, Album name, Elapsed time, “Streaming Audio”, etc. is displayed. Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Bluetooth-Audio...
Page 327 ® 3-3. Using the Bluetooth audio system Operating the system using voice commands By following voice guidance instructions output from the speaker, ® voice commands enable the operation of the Bluetooth audio sys- tem without the need to check the display or operate ■...
Page 328 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system for the first time ® Before using the Bluetooth audio system, it is necessary to register ® a Bluetooth enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player: STEP Press and hold...
Page 329 ® 3-3. Using the Bluetooth audio system STEP Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper- ation of the portable player. Guidance for registration completion is heard. ® If the portable player has a Bluetooth phone, the phone can be reg- istered at the same time.
Page 330 ® 3-3. Using the Bluetooth audio system ■ When using a voice command For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly. ■ Situations where the system may not recognize your voice ●...
Page 331 ® 3-3. Using the Bluetooth audio system ® Operating a Bluetooth enabled portable player Power Volume Selector knob Displaying text messages Fast-forwarding Selecting tracks and reversing Playback/pause Playback Selecting an album Press “∨” or “∧” on Selecting tracks Press “∧” or “∨” on Playing and pausing tracks Press...
Page 332 ® 3-3. Using the Bluetooth audio system Fast-forwarding and reversing tracks ∧ Press and hold “ ” or “∨” on Switching the display Press Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time Using the steering wheel audio switches →P.
Page 333 ® 3-3. Using the Bluetooth audio system ® Setting up a Bluetooth enabled portable player ® Registering a portable player in the Bluetooth audio system allows the system to function. The following functions can be used for reg- istered portable players: ■...
Page 334 ® 3-3. Using the Bluetooth audio system Registering a portable player Select “Pair Audio Players (Pair audio player)” using a voice com- mand or , and perform the procedure for registering a portable player. (→P. 352) Selecting a portable player to be used STEP Select “Select Audio Player”...
Page 335 ® 3-3. Using the Bluetooth audio system STEP Press the talk switch and say “From car” or “From audio”, and select “Confirm” using a voice command or Vehicles with smart key system: If “From car” is selected, the porta- ble player will be automatically connected whenever the “ENGINE START STOP”...
Page 336 ® 3-3. Using the Bluetooth audio system Listing the registered portable players Select “List Audio Players” using a voice command or . The list of registered portable players will be read aloud. When listing is complete, the system returns to “BT Audio Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available:...
Page 337 ® 3-3. Using the Bluetooth audio system Deleting a registered portable player STEP Select “Delete Audio Player” using a voice command or STEP Select the portable player to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or a.
Page 338 ® 3-3. Using the Bluetooth audio system ® Bluetooth audio system setup ■ System setup items and operation procedures →P. 385...
Page 339 3-4. Using the hands-free phone system (for cellular phone) ∗ Hands-free phone system (for cellular phone) features ® This system supports Bluetooth , which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone.
Page 340 3-4. Using the hands-free phone system (for cellular phone) Title Page Using the hands-free phone system ■ Operating the system using a voice command ■ Using the hands-free phone system for P. 367 the first time ■ Menu list of the hands-free phone system Making a phone call ■...
Page 341 3-4. Using the hands-free phone system (for cellular phone) ■ Conditions under which the system will not operate ® ● If using a cellular phone that does not support Bluetooth ● If the cellular phone is switched off ● If you are outside service range ●...
Page 342 3-4. Using the hands-free phone system (for cellular phone) CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
Page 343 3-4. Using the hands-free phone system (for cellular phone) ∗ Using the hands-free phone system ■ Audio unit Display A message, name, phone number, etc. is displayed. Lower-case characters and special characters, such as an umlaut, cannot be dis- played. Selects speed dials Selects items such as menu or number...
Page 344 3-4. Using the hands-free phone system (for cellular phone) ■ Steering wheel telephone switches Volume The voice guidance volume cannot be adjusted by using this switch. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch...
Page 345 3-4. Using the hands-free phone system (for cellular phone) Operating the system using a voice command By following voice guidance instructions output from the speaker, voice commands enable the operation of the hands-free phone sys- tem without the need to check the display or operate ■...
Page 346 3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered.
Page 347 3-4. Using the hands-free phone system (for cellular phone) Registration to the hands-free phone system only STEP Select “Phone Only” using a voice command or ® Registration to the hands-free phone system and Bluetooth audio system at the same time STEP Select “Int.
Page 348 3-4. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system ■ Normal operation Second First menu Third menu Operation detail menu CallBack Dialing a number stored in (Call the incoming call history back) Dialing a number stored in Redial the outgoing call history Dial by...
Page 349 3-4. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu Set PIN Setting a PIN code Phonebook Lock (Phone book Locking the phone book Security lock) Phonebook Unlock (Phone Unlocking the phone book book unlock) Registering the cellular Pair Phone...
Page 350 3-4. Using the hands-free phone system (for cellular phone) ■ Using a short cut key First menu Second menu Operation detail Dialing a number registered Dial “XXX (name)” in the phone book Dial “XXX (number)” Dialing the input numbers Phone book add Adding a new number entry Changing the name of a...
Page 351 3-4. Using the hands-free phone system (for cellular phone) ■ Automatic volume adjustment When vehicle speed reaches 50 mph (80 km/h) or more, the volume auto- matically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. ■...
Page 352 3-4. Using the hands-free phone system (for cellular phone) Making a phone call ■ Making a phone call ● Dialing by inputting a number “Dial by Number” ● Dialing by inputting a name “Dial by Name (Dial by name)” ● Speed dialing ●...
Page 353 3-4. Using the hands-free phone system (for cellular phone) STEP Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”. c. Select “Dial” using Dialing by inputting a name STEP Press the talk switch and say “Dial by name”.
Page 354 3-4. Using the hands-free phone system (for cellular phone) When receiving a phone call ■ Answering a phone call Press the off-hook switch. ■ Refusing a phone call Press the on-hook switch. Transferring a phone call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call.
Page 355 3-4. Using the hands-free phone system (for cellular phone) STEP Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis- played. b. Select the desired number using The following operations can be performed: Dialing: Press the off-hook switch or select “Dial”...
Page 356 3-4. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below using a voice command or ●...
Page 357 3-4. Using the hands-free phone system (for cellular phone) Selecting a cellular phone to be used STEP Select “Select Phone” using a voice command or Pattern A STEP Select a cellular phone to be used by either of the following methods, and select “Confirm”...
Page 358 3-4. Using the hands-free phone system (for cellular phone) STEP Press the talk switch or select “Record Name” using and say a new name. STEP Select “Confirm” using a voice command or Listing the registered cellular phones Selecting “List Phones” using a voice command or causes the list of registered cellular phones to be read aloud.
Page 359 3-4. Using the hands-free phone system (for cellular phone) Deleting a cellular phone STEP Select “Delete Phone” using a voice command or STEP Select a cellular phone to be deleted by either of the following methods and select “Confirm” using a voice command or a.
Page 360 3-4. Using the hands-free phone system (for cellular phone) Turning the hands-free phone automatic connection on/off ■ Turning off the automatic connection STEP Select “Handsfree Power” using a voice command or STEP Select “Turn off” using a voice command or ■...
Page 361 3-4. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure ● Setting or changing the PIN (Personal Identification Number) 1.
Page 362 3-4. Using the hands-free phone system (for cellular phone) ■ Changing the PIN STEP Select “Set PIN” using a voice command or STEP Enter the registered PIN using a voice command or STEP Enter a new PIN using a voice command or When using , input the code 1 digit at a time.
Page 363 3-4. Using the hands-free phone system (for cellular phone) Setting voice guidance volume STEP Select “Guidance Volume” using STEP Change the voice guidance volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization STEP Select “Reset Settings” and then “Confirm” using STEP Select “Confirm”...
Page 364 3-4. Using the hands-free phone system (for cellular phone) ■ Initialization ● The following data in the system can be initialized: • Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code ●...
Page 365 3-4. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: ● Adding a new phone number 1. “Phonebook” → 2. “Add Entry” ● Setting speed dial 1.
Page 366 3-4. Using the hands-free phone system (for cellular phone) STEP Use one of the following methods to input a telephone num- ber: Inputting a telephone number using a voice command STEP2-1 Select “By Voice (By voice)” using a voice command STEP2-2 Press the talk switch, say the desired number, and select “Confirm”...
Page 367 3-4. Using the hands-free phone system (for cellular phone) Inputting a phone number using STEP2-1 Select “Manual Input” using STEP2-2 Input a phone number using , and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or incoming call history STEP2-1 Select “Call History”...
Page 368 3-4. Using the hands-free phone system (for cellular phone) STEP Select the name to be registered by either of the following methods, and select “Confirm” using a voice command or a. Press the talk switch and say the desired name. b.
Page 369 3-4. Using the hands-free phone system (for cellular phone) STEP Select a desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” using a voice command or b.
Page 370 3-4. Using the hands-free phone system (for cellular phone) Deleting registered data STEP Select “Delete Entry” using a voice command or STEP Select the data to be deleted by either of the following meth- ods, and select “Confirm” using a voice command or a.
Page 371 3-4. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting “List names” using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will become available.
Page 372 3-5. Using the interior lights Interior lights list Your Toyota is equipped with an illuminated entry system to assist in entering the vehicle. Owing to the function of the system, the lights shown in the following illustration automatically turn on/off accord-...
Page 373 3-5. Using the interior lights Personal/interior light main switch and personal/interior lights Personal/interior light main switch “OFF” The personal/interior lights and interior light can be individually turned on or off. Door position The personal/interior lights and interior light come on when a door or the glass hatch (if equipped) is opened.
Page 374 20 minutes. ■ Customization that can be configured at Toyota dealer Settings (e.g. The time elapsed before lights turn off) can be changed. (Customizable features →P. 602)
Page 375 3-6. Using the storage features List of storage features Auxiliary boxes Overhead console Glove box Bottle holders Cup holders Side table Console box...
Page 376 3-6. Using the storage features Glove box CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●...
Page 377 3-6. Using the storage features Console box Console box Upper Pull up the knob to release the lock. Lift the lid. Lower Push down the lever. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 378 3-6. Using the storage features Overhead console Overhead console The overhead console is useful for temporarily storing sunglasses and similar small items. Press in the lid. CAUTION ■ Caution while driving Do not leave the overhead console open while driving. Items stored in it may fall out and cause injury.
Page 379 3-6. Using the storage features Cup holders Cup holders Front (type A) Front (type B) Lift the lid. Console box Pull out the cup holder.
Page 380 3-6. Using the storage features Cup holders Side table Install the side table before using the cup holder. (→P. 410) Removing the adapters changes the size. (→P. 405) Rear Removing the adapters changes the size. (→P. 405)
Page 381 3-6. Using the storage features Cup holders ■ Adjusting size of the cup holder (front [type B], side table and rear) Front (type B) Remove the separator. The separator may be removed for clean- ing. Side table Remove the adapter. Rear Remove the adapter.
Page 382 3-6. Using the storage features Cup holders CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or beverage cans in the cup holders. Even when the lid is closed, items must not be stored in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 383 3-6. Using the storage features Bottle holders Bottle holders Front Rear CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 384 3-6. Using the storage features Auxiliary boxes Auxiliary boxes Type A Pull up the lever. Type B (if equipped) Lift the lid.
Page 385 3-6. Using the storage features Auxiliary boxes Type C Lift the lid. ■ Auxiliary box (type C) The side table can be installed. (→P. 410) CAUTION ■ Caution while driving Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.
Page 386 3-6. Using the storage features Side table Side table ■ Installing the side table Take out the side table from the STEP console box. STEP Remove the second center seat. (→P. 82) Engage the front pins of the STEP side table with the hooks. Push down on the side table to engage the rear pin locks.
Page 387 3-6. Using the storage features Side table Pull the lock release lever to STEP remove the side table. Stow the side table in the con- STEP sole box. Push down on the end to engage STEP the pins in the holes and close the console box door.
Page 388 3-7. Other interior features Sun visors Forward position Flip down. Side position Flip down, unhook, and swing to the side. Side extender Place in side position then slide backwards.
Page 389 3-7. Other interior features Vanity mirrors Slide the cover. The light turns on when the cover is opened. (Vehicles with vanity mirror light) NOTICE ■ To prevent the battery from being discharged (vehicles with vanity mir- ror light) Do not leave the vanity lights on for extended periods while the engine is stopped.
Page 390 3-7. Other interior features Clock (vehicles without multi-information display) Adjusts the hours. Adjusts the minutes. ■ The clock is displayed when The engine switch is in the “ACC” or “ON” position.
Page 391 3-7. Other interior features Conversation mirror Press in the lid. Push the lid back up half way. ■ To use the overhead console from the conversation mirror state Fully close the lid, then open it again. (→P. 402)
Page 392 3-7. Other interior features Power outlets The power outlet can be used for the following components. 12 V: Accessories that run on less than 10 A. 120 VAC: Accessories that use less than 100 W. ■ 12 V Type A (vehicles with seat heater) Type B (vehicles without seat heater)
Page 393 3-7. Other interior features Type C Type D ■ 120 VAC (vehicles with rear entertainment system)
Page 394 3-7. Other interior features ■ The power outlet can be used when 12 V Vehicles without smart key system: The engine switch is in the “ACC” or “ON” position. Vehicles with smart key system: The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
Page 395 3-7. Other interior features NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. ■...
Page 396 3-7. Other interior features ∗ Seat heaters Pops the knob out Driver's seat The indicator light comes on. Adjusts the seat tempera- ture The further you turn the knob Front passenger's seat clockwise, the warmer the seat becomes. ■ The seat heaters can be used when Vehicles without smart key system The engine switch is in the “ON”...
Page 397 3-7. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
Page 398 3-7. Other interior features Armrests Pull the armrest down for use. NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest.
Page 399 When installing the driver's floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver's seat. ●...
Page 400 3-7. Other interior features Luggage compartment features ■ Cargo hooks Cargo hooks are provided for securing loose items. ■ Grocery bag hooks ■ Auxiliary box Lift the center deck board.
Page 401 3-7. Other interior features ■ Separating the luggage compartment The center deck board can be used to separate the luggage compartment. Remove center deck board and insert it upright into the groove. The board cannot be inserted when the luggage cover is stowed.
Page 402 3-7. Other interior features Pull out the luggage cover and STEP engage both ends to secure it. ■ When taking out luggage through the glass hatch (vehicles with glass hatch) Pull the luggage cover to disengage both STEP ends. Engage both ends of the luggage cover STEP with the grooves shown in the illustration and stand the cover upright.
Page 403 3-7. Other interior features ■ Removing the luggage cover (vehicles with luggage cover) The luggage cover can be removed by following the procedure below. Detach the hooks. Push in the left side of the luggage cover while keeping hold of the right side.
Page 404 3-7. Other interior features CAUTION ■ When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their positions when they are not in use. ■ Caution while driving Do not drive with any of the deck boards opened. Items may fall out and cause injury.
Page 405 3-7. Other interior features ∗ Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manufac- ®...
Page 406 3-7. Other interior features Press and hold down one of the STEP ® buttons on the HomeLink the button on the transmitter. When the indicator light on the ® HomeLink changes from a slow to a rapid flash within 20 sec- onds, you can release both but- tons.
Page 407 3-7. Other interior features ■ Programming a Rolling Code system (for U.S.A. owners) If your device is Rolling Code equipped, follow the steps under the ® heading “Programming the HomeLink ” before proceeding with the steps listed below. STEP Locate the learn button on the ceiling mounted garage door opener motor.
Page 408 ® the remaining HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. ■ Reprogramming a button ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 409 3-7. Other interior features ■ Before programming ● Install a new battery in the transmitter. ● The battery side of the transmitter must be pointed away from the ® HomeLink ■ Certification for the garage door opener For vehicles sold in the U.S.A. FCC ID: CB2300NHL3 FCC ID: CB2281AHL4 NOTE:...
Page 410 3-7. Other interior features CAUTION ■ When programming a garage door or other remote control device The garage door may operate, so ensure people and objects are out of dan- ger to prevent potential harm. ■ Conforming to federal safety standards ®...
Page 411 3-7. Other interior features ∗ Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, press “AUTO”. ■ Displays and directions Display Direction North Northeast East...
Page 412 3-7. Other interior features Calibrating the compass The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
Page 413 3-7. Other interior features ■ Circling calibration When C appears on the display, drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed. If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.
Page 414 3-7. Other interior features NOTICE ■ To avoid compass malfunctions Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause a malfunction of the compass sensor. ■ To ensure normal operation of the compass ●...
Page 415 4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 416 4-1. Maintenance and care ■ Aluminum wheels ● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. ●...
Page 417 ■ If the windshield washer nozzle become blocked Contact your Toyota dealer. Do not try to clear it with a pin or other object. This may damage the nozzle. ■ Cleaning the exterior lights ●...
Page 418 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 419 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 420 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ●...
Page 421 It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 422 With multi-information display: Continue to press and hold the but- ton until “COMPLETE” appears on the multi-information display. ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information.
Page 423 4-2. Maintenance CAUTION ■ Warning in handling of battery ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.
Page 424 “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items...
Page 425 4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be held securely Automatic transmission “Park” on an incline with the shift lever in mechanism • Moves smoothly? •...
Page 426 4-2. Maintenance Vehicle exterior Items Check points Door • Operate smoothly? Engine hood • The lock system works properly? • Is there any leakage after park- Fluid leaks ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? Tire •...
Page 427 If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■...
Page 428 Brake fluid level (→P. 472) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 429 4-3. Do-it-yourself maintenance Items Parts and tools • Fuse with same amperage rating Fuses (→P. 499) as original Radiator and condenser ⎯ (→P. 471) • Tire pressure gauge Tire inflation pressure (→P. 487) • Compressed air source • Water washer fluid containing Washer fluid (→P.
Page 430 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing, and tools away from the moving fan and engine drive belt.
Page 431 4-3. Do-it-yourself maintenance CAUTION ■ Safety glasses Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting in the eyes. NOTICE ■ If you remove the air cleaner filter Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air.
Page 432 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the auxiliary catch lever STEP and lift the hood. Hold the hood open by insert- STEP ing the supporting rod into either of the slots.
Page 433 4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 434 4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. Front (2.7L 4-cylinder [1AR-FE] engine) Front (3.5L V6 [2GR-FE] engine) Rear (2WD models)
Page 435 4-3. Do-it-yourself maintenance Rear (4WD models) Removing the front jack point cover (3.5 L V6 [2GR-FE] engine) Before jacking up the vehicle, remove the jack point cover. Turn the bolts counterclockwise STEP and remove them. Remove the cover. STEP...
Page 436 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri- ous injury. ● Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 437 4-3. Do-it-yourself maintenance NOTICE ■ Front jack point cover ● After installing the front jack point cover, make sure it is securely in its orig- inal position. ● Before jacking up your vehicles, remove the front jack point cover. Other- wise, the cover may be damaged.
Page 438 4-3. Do-it-yourself maintenance Engine compartment 2.7 L 4-cylinder (1AR-FE) engine Washer fluid tank (→P. 477) Battery (→P. 473) Engine oil filler cap Brake fluid reservoir (→P. 467) (→P. 472) Engine oil level dipstick Fuse boxes (→P. 499) (→P. 466) Electric cooling fans Engine coolant reservoir Condenser (→P.
Page 439 4-3. Do-it-yourself maintenance 3.5 L V6 (2GR-FE) engine Washer fluid tank (→P. 477) Battery (→P. 473) Engine oil filler cap Brake fluid reservoir (→P. 467) (→P. 472) Engine oil level dipstick Fuse boxes (→P. 499) (→P. 466) Electric cooling fans Engine coolant reservoir Condenser (→P.
Page 440 4-3. Do-it-yourself maintenance Engine compartment cover ■ Removing the engine compartment cover ■ Installing the clips NOTICE ■ After installing an engine compartment cover Make sure that the cover is securely installed in its original position.
Page 441 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP Park the vehicle on level ground. After warming up the engine and turning it off, wait more than five minutes for the oil to drain back into the bottom of the engine.
Page 442 4-3. Do-it-yourself maintenance 3.5 L V6 (2GR-FE) engine Full ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 443 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 444 4-3. Do-it-yourself maintenance NOTICE ■ To prevent serious engine damage Check the oil level on a regular basis. ■ When replacing the engine oil ● Be careful not to spill engine oil on the vehicle components. ● Avoid overfilling, as the engine could be damaged. ●...
Page 445 Visually check the radiator, hoses, engine coolant filler cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap opening pres- sure and check for leaks in the cooling system.
Page 446 Check the radiator and condenser, and clear away any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION ■ When the engine is hot Do not touch the radiator or condenser as they may be hot and may cause burns.
Page 447 4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Fluid type SAE J1703 or FMVSS No.116 DOT 3 Items Clean funnel...
Page 448 4-3. Do-it-yourself maintenance NOTICE ■ If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high. If the reservoir needs frequent refilling, it may indicate a serious problem.
Page 449 4-3. Do-it-yourself maintenance ■ Adding distilled water O.K. STEP Remove the vent plug. STEP Add distilled water. If the “UPPER”/“MAX” line cannot be seen, check the fluid level by looking directly at the cell. STEP Put the vent plug back on and close securely. ■...
Page 450 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ●...
Page 451 4-3. Do-it-yourself maintenance CAUTION ● If electrolyte gets on your clothes It can soak through clothing on to your skin. Immediately take off the cloth- ing and follow the procedure above if necessary. ● If you accidentally swallow electrolyte Drink a large quantity of water or milk. Follow with milk of magnesia, beaten raw egg or vegetable oil.
Page 452 4-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the following situations. ● Any washer does not work. ● The low washer fluid warning light comes on (vehicles with- out multi-information display). ● The warning message appears on the multi-informa- tion display (vehicles with multi-information display).
Page 453 ■ Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom- mends that tire rotation is Front carried out at the same inter- val as tire inspection.
Page 454 4-3. Do-it-yourself maintenance ■ The tire pressure warning system Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P. 531, 539)
Page 455 Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (→P. 481) Initializing the tire pressure warning system ■...
Page 456 The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code of the tire pressure warning valve and transmitter. Have the ID code registered by your Toyota dealer.
Page 457 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 458 4-3. Do-it-yourself maintenance ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 459 Initialization can be completed in a few minutes. However, in the follow- ing cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ●...
Page 460 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 461 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 462 4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (→P. 590) ■ Inspection and adjustment procedure Tire valve Tire pressure gauge STEP Remove the tire valve cap.
Page 463 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent reinflating, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 464 4-3. Do-it-yourself maintenance ● Always use a tire pressure gauge. The appearance of the tire can be misleading. In addition, tire infla- tion pressures that are even just a few pounds off can degrade ride and handling. ● Do not bleed or reduce tire inflation pressure after driving. It is normal for the tire inflation pressure to be higher after driving.
Page 465 ● Bent wheels that have been straightened ■ Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 466 4-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your Toyota are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure.
Page 467 Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 468 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method STEP Vehicles without smart key system: Turn the engine switch OFF. Vehicles with smart key system: Turn the “ENGINE START STOP”...
Page 469 4-3. Do-it-yourself maintenance Remove the filter cover. STEP ■ Replacement method Remove the air conditioning filter and replace it with a new one. The “↑UP” marks shown on the filter should be pointing up. ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule.
Page 470 4-3. Do-it-yourself maintenance NOTICE ■ When using the air conditioning system Make sure that a filter is always installed. Using the air conditioning system without a filter may cause damage to the system.
Page 471 4-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with a rag.) ●...
Page 472 4-3. Do-it-yourself maintenance ■ Replacing the battery (vehicles with smart key system) Take out the mechanical key. STEP Remove the cover. STEP Remove the depleted battery. STEP Insert a new battery with the “+” terminal facing up.
Page 473 Use a CR2032 (vehicles without smart key system) or CR1632 (vehicles with smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. ● Replace only with the same or equivalent type recommended by your Toyota dealer.
Page 474 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP Vehicles without smart key system: Turn the engine switch OFF.
Page 475 4-3. Do-it-yourself maintenance Under the instrument panel Remove the lid. STEP After a system failure, see “Fuse layout and amperage rat- ings” (→P. 502) for details about which fuse to check. Remove the fuse with the pull- STEP out tool. STEP Check if the fuse has blown.
Page 476 Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type C Normal fuse Blown fuse Contact your Toyota dealer. Type D Normal fuse Blown fuse Contact your Toyota dealer.
Page 477 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Type A (fuse block on the back of the cover) Type A (fuse block) Fuse Ampere Circuit SPARE 7.5 A Spare fuse SPARE 15 A Spare fuse SPARE 25 A Spare fuse...
Page 478 4-3. Do-it-yourself maintenance Fuse Ampere Circuit DEF RLY 10 A Rear window defogger MIR HTR 10 A Outside rear view mirror defoggers PWR OUTLET 20 A Power outlet DOOR NO.1 25 A Multiplex communication system Multiport fuel injection system/ EFI NO.2 10 A sequential multiport fuel injection system...
Page 479 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 80 A Electric power steering 30 A Starting system Rear seat entertainment system, 10 A audio system RADIO NO.1 20 A Audio system Steering sensor, gauges and meters, clock, main body ECU, wireless remote control, smart key ECU-B NO.1 10 A system, power back door, multi-...
Page 480 4-3. Do-it-yourself maintenance Fuse Ampere Circuit H-LP RH HI 15 A Right-hand headlight (high beam) H-LP LH LO 15 A Left-hand headlight (low beam) H-LP RH LO 15 A Right-hand headlight (low beam) HORN 10 A Horn Multiport fuel injection system/ EFI NO.1 10 A sequential multiport fuel injection...
Page 481 4-3. Do-it-yourself maintenance ■ Under the instrument panel Front side of the fuse block Fuse block Fuse Ampere Circuit P/SEAT 30 A Power seat POWER 30 A Power windows RR DOOR RH 25 A Power windows RR DOOR LH 25 A Power windows FR FOG 10 A...
Page 482 4-3. Do-it-yourself maintenance Fuse Ampere Circuit DOOR NO.2 25 A Power windows 7.5 A Starting system P/SEAT (PS) 30 A Power seat A/C NO.1 10 A Air conditioning system FUEL OPN 7.5 A No circuit S/ROOF 20 A Electric moon roof Parking lights, tail lights, license TAIL 15 A...
Page 483 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Audio system, back-up lights, charging system, emergency flash- ers, traction control system, wind- shield wiper de-icer, air GAUGE NO.1 10 A conditioning system, charging sys- tem, rear view monitor system, trailer lights, multiport fuel injection system/sequential multiport fuel injection system FR WIP...
Page 484 Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire.
Page 485 You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 486 4-3. Do-it-yourself maintenance ■ Rear bulb locations Rear turn signal lights Stop/tail and rear side marker lights License plate lights Back-up lights Replacing light bulbs ■ Headlights Turn the bulb base counterclock- STEP wise. Low beam (outside) High beam (inside)
Page 487 4-3. Do-it-yourself maintenance Unplug connector while STEP depressing the lock release. Low beam High beam ■ Fog lights (if equipped) Unplug connector while STEP depressing the lock release.
Page 488 4-3. Do-it-yourself maintenance Turn the bulb counterclockwise. STEP ■ Parking, front side marker and front turn signal lights Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 489 4-3. Do-it-yourself maintenance ■ Back-up lights, stop/tail and rear side marker, and rear turn signal lights Left side Open the back door and remove STEP the cover. To protect the cover, place a rag between the flathead screwdriver and cover as shown in the illus- trations.
Page 490 4-3. Do-it-yourself maintenance Remove the light bulb. STEP Rear turn signal light Stop/tail and rear side marker light Back-up light ■ License plate lights Remove the screw and remove STEP the unit. Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 491 Water has built up inside the headlight. ■ LED high mounted stoplight The high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. CAUTION ■ Replacing light bulbs ●...
Page 492 5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Vehicles without navigation system Press the switch to flash all the turn signal lights. To turn them off, press the switch once again.
Page 493 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 494 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet(s). This should only be attempted on hard surfaced roads for short distances at low speeds.
Page 495 5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelets and the cables or chains. Always be cautious of the surroundings and other vehicles while towing. ●...
Page 496 5-1. Essential information Tighten down the towing eyelet STEP securely using a wheel nut wrench. ■ Location of the emergency towing eyelet →P. 540 CAUTION ■ Installing towing eyelet to the vehicle Make sure that towing eyelet is installed securely. If not securely installed, towing eyelet may come loose during towing.
Page 497 5-1. Essential information Towing with a sling-type truck NOTICE ■ To prevent body damage Do not tow with a sling-type truck, either from the front or rear. Towing with a wheel lift-type truck From front (2WD models) Release the parking brake.
Page 498 5-1. Essential information From front (4WD models) Use a towing dolly under the rear wheels. NOTICE ■ To prevent damaging the vehicle When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed.
Page 499 5-1. Essential information Using a flat bed truck If your Toyota is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°.
Page 500 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 501 5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 502 Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer)* •...
Page 503 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: (U.S.A.)
Page 504 Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible.
Page 505 Stop the vehicle in a safe light (vehicles without place and shift the shift multi-information display) lever to P. Indicates that the auto- If the light does not go off, matic transmission fluid contact your Toyota dealer. temperature is too high.
Page 506 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Low washer fluid warning light (vehicles without Fill the tank. multi-information display) Low level of washer fluid Maintenance Required reminder light Indicates that mainte- nance is required accord- ing to the driven distance on the maintenance schedule.*...
Page 507 • Flat tire (→P. 540) even if the tire inflation pressure is adjusted, have the system checked by your Toyota dealer. When the light comes on after blinking for 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer.
Page 508 5-2. Steps to take in an emergency : Open door warning buzzer: The open door warning buzzer sounds to alert one or more of the doors is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). : Driver's and front passenger’s seat belt reminders: The driver’s and front passenger’s seat belt reminders sound to alert the driver and front passenger that his or her seat belt is not fastened.
Page 509 5-2. Steps to take in an emergency ■ When the tire pressure warning light comes on Check the tire inflation pressure and adjust to the appropriate level. Pushing the tire pressure warning reset switch does not turn off the tire pressure warning light.
Page 510 If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. ● If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
Page 511 Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest Toyota dealer. ● Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes.
Page 512 5-2. Steps to take in an emergency CAUTION Please note that the TPMS (tire pressure warning system) is not a sub- stitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light).
Page 513 ■ Warning buzzer A buzzer may sound when a warning message is shown on the multi-information display. ■ If the warning message is shown again after its correction procedure has been performed Contact your Toyota dealer as soon as possible.
Page 514 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ●...
Page 515 5-2. Steps to take in an emergency Taking out the jack Remove the right side deck STEP board. Unhook the tightening strap and STEP remove the pad. After storing the jack, make sure it is securely held by the tightening strap. Loosen STEP Tighten...
Page 516 5-2. Steps to take in an emergency Taking out the spare tire Open the center deck board and STEP remove the cover. Remove the cover. STEP If it is difficult to remove the cover, you can use the key. Attach the adapter socket (for STEP removing a spare tire) to the spare tire clamp bolt.
Page 517 5-2. Steps to take in an emergency Assembling the jack handle. STEP Remove the jack handle and assemble it by following these steps. Loosen the screw. Assemble the jack handle and tighten the screw. Check that the screw is firmly tightened.
Page 518 5-2. Steps to take in an emergency Pull out the spare tire and stand STEP it against the bumper. Remove the holding bracket. STEP...
Page 519 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP STEP Wheel Flat tire chock positions Behind the Left- rear right- hand hand side side tire Front Behind the Right- rear left- hand hand side side tire In front of...
Page 520 5-2. Steps to take in an emergency Slightly loosen the wheel nuts STEP (one turn). Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point.
Page 521 5-2. Steps to take in an emergency Raise the vehicle until the tire is STEP slightly raised off the ground. Remove all the wheel nuts and STEP the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
Page 522 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 523 5-2. Steps to take in an emergency Lower the vehicle. STEP Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m)
Page 524 5-2. Steps to take in an emergency Stowing the flat tire, jack and all tools STEP Remove the center wheel ornament by pushing from the reverse side. Put the flat tire on the ground STEP with the outer side facing up and install the holding bracket.
Page 525 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 526 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire Failure to follow these precautions could cause the wheel nuts to loosen and the tire to fall off, resulting in death or serious injury. ● Have the wheel nuts tightened with a torque wrench to 76 ft•lbf (103 N•m, 10.5 kgf•m) as soon as possible after changing wheels.
Page 527 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 528 5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure (→P. 170, 174) or releasing the steering lock (→P. 172, 175), confirm the following points. ■...
Page 529 ● There may be a malfunction in the steering lock system (vehi- cles with smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with smart key system) When the engine does not start, the following steps can be used as an interim measure to start the engine if the “ENGINE START STOP”...
Page 530 (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 531 If you lose your keys/wireless remote control transmitter ■ Keys New genuine keys can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key and the key number stamped on the key number plate.
Page 532 Changing “ENGINE START STOP” switch modes and starting the engine STEP Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side of STEP electronic “ENGINE START STOP” switch. If any of the doors is opened and...
Page 533 5 seconds after the buzzer sounds, keeping the brake pedal depressed. In the event that the “ENGINE START STOP” switch still cannot be operated, contact your Toyota dealer. ■ Stopping the engine Shift the shift lever to P and press the “ENGINE START STOP” switch as you normally do when stopping the engine.
Page 534 You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below. STEP Connect the jumper cables.
Page 535 5-2. Steps to take in an emergency 3.5 L V6 (2GR-FE) engine Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cable to ground on your vehicle as shown in the illustration.
Page 536 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
Page 537 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery. ● Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended termi- nal.
Page 538 Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fans are not operating: Stop the engine and call your Toyota dealer. After the engine has cooled STEP down sufficiently, check the...
Page 539 Water can be used in an emer- gency if engine coolant is (→ unavailable. P. 580 Have the vehicle checked at the nearest Toyota dealer as soon as possible. ■ Overheating If you observe the following, your vehicle may be overheating.
Page 540 5-2. Steps to take in an emergency NOTICE ■ When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine.
Page 541 5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. STEP Stop the engine. Set the parking brake and put the shift lever to P.
Page 542 5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle may require towing to be freed.
Page 543 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: STEP Steadily step on the brake pedal with both feet and firmly...
Page 544 5-2. Steps to take in an emergency Vehicles with a smart key sys- STEP tem: Stop the engine by press- ing and holding the “ENGINE START STOP” switch for 3 consecutive seconds or more. Press and hold for 3 seconds or more STEP Stop the vehicle in a safe place by the road.
Page 545 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 188.4 in. (4785 mm) Overall width 75.2 in. (1910 mm) Without roof rails 68.1 in. (1730 mm) Overall height With roof rails 69.3 in. (1760 mm) Wheelbase 109.8 in.
Page 546 Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is also stamped on the top left of the instrument panel.
Page 547 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 2.7 L 4-cylinder (1AR-FE) engine 3.5 L V6 (2GR-FE) engine...
Page 548 6-1. Specifications Engine Model 1AR-FE 2GR-FE 4-cylinder in line, 6-cylinder V type, Type 4-cycle, gasoline 4-cycle, gasoline 3.54 × 4.13 in. 3.70 × 3.27 in. Bore and stroke (90.0 × 105.0 mm) (94.0 × 83.0 mm) Displacement 163.1 cu.in. (2672 cm 210.9 cu.in.
Page 549 ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC multigrade engine oil...
Page 550 6-1. Specifications How to read oil container label: The ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is added to some oil containers to help you select the oil you should use.
Page 551 6.4 qt. (6.1 L, 5.4 Imp. qt.) ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC multigrade engine oil...
Page 552 6-1. Specifications How to read oil container label: The ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is added to some oil containers to help you select the oil you should use.
Page 553 11.6 qt. (11.0 L, 9.7 Imp. qt.) 12.4 qt. (11.7 L, 10.3 Imp. qt.)* Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 554 6-1. Specifications Ignition system Spark plug Make 2.7 L 4-cylinder (1AR-FE) engine DENSO, SK16HR11 3.5 L V6 (2GR-FE) engine DENSO FK20HR11 0.043 in. (1.1 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine. Electrical system Battery 12.6 ⎯...
Page 555 NOTICE ■ Automatic transmission fluid type Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmis- sion of your vehicle.
Page 556 6-1. Specifications Transfer (4WD models) Oil capacity 1.0 qt. (0.9 L, 0.8 Imp. qt.) Oil type Hypoid gear oil API GL-5 Above 0°F (-18°C): SAE 90 Recommended oil viscosity Below 0°F (-18°C): SAE 80W or 80W-90 Brakes Pedal clearance* 3.3 in. (84.4 mm) Min. 0.08 ⎯...
Page 557 6-1. Specifications Tires and wheels Type A Tire size P245/65R17 105S Driving under normal conditions Front: 30 psi (210 kPa, 2.1 kgf/cm or bar) Rear: 30 psi (210 kPa, 2.1 kgf/cm or bar) Spare: Tire inflation pressure 30 psi (210 kPa, 2.1 kgf/cm or bar) (Recommended cold tire Driving at high speeds above 100 mph...
Page 558 6-1. Specifications Type B Tire size P245/55R19 103S Driving under normal conditions Front: 30 psi (210 kPa, 2.1 kgf/cm or bar) Rear: 30 psi (210 kPa, 2.1 kgf/cm or bar) Spare: 30 psi (210 kPa, 2.1 kgf/cm or bar) Driving at high speeds above 100 mph Tire inflation pressure (160 km/h) (in countries where such speeds (Recommended cold tire...
Page 559 6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights High beam 9005 ⎯ Low beam Parking, front side marker and 3457NA 28/8 front turn signal lights ⎯ Fog lights* Exterior ⎯ Rear turn signal lights Back-up lights Stop/tail and rear side marker 7443 21/5 lights...
Page 560 ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■...
Page 561 10% ethanol). (85% ethanol) ● If you use gasohol in your Toyota, be sure that it has an octane rating no lower than 87. ● Toyota does not recommend the use of gasoline containing methanol.
Page 562 Toyota does not recommend gasoline containing MMT Some gasoline contains octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
Page 563 6-1. Specifications Tire information Typical tire symbols Tire size (→P. 593) DOT and Tire Identification Number (TIN) (→P. 592) Uniform tire quality grading For details, see “Uniform tire quality grading” that follows. Location of treadwear indicators (→P. 478)
Page 564 6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL”...
Page 565 6-1. Specifications Typical DOT and tire identification number (TIN) DOT symbol* Tire Identification Number (TIN) Tire manufacturer's identifica- tion mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year *: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
Page 566 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
Page 567 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 568 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100.
Page 569 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire fail- ure.
Page 570 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 571 6-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 572 6-1. Specifications Tire related term Meaning The parting of the innerliner from cord material Innerliner separation in the carcass (a) The sidewall that contains a whitewall, bears white lettering, or bears manufac- turer, brand, and/or model name molding that is higher or deeper than the same Intended outboard molding on the other sidewall of the tire, or sidewall...
Page 573 6-1. Specifications Tire related term Meaning A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load...
Page 574 6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indicators designed to give a visual indication of the...
Page 575 Your vehicle includes a variety of electronic features that can be personalized to your preferences. Programming these preferences requires specialized equipment and may be performed by your Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer. Customized Item Function Default setting...
Page 576 6-2. Customization Customized Item Function Default setting setting Wireless remote control Driver's door unlocked in one All doors Unlocking operation step, all doors unlocked in one unlocked in two step steps Automatic door lock function to be activated if door is not opened after being unlocked Time elapsed before Wireless...
Page 577 6-2. Customization Customized Item Function Default setting setting Light sensor sensitivity Level 3 Level 1 to 5 Time elapsed before 0 seconds headlights automati- 60 seconds 30 seconds cally turn off after doors 90 seconds are closed Automatic Ambient light level at light control which instrument illumi- -2 (darker) to...
Page 578 6-2. Customization Customized Item Function Default setting setting Operation when you approach the vehicle with the electronic key on your person Operation when the doors are unlocked using the wireless Outer foot remote control, key or lights entry function (if equipped) →...
Page 579 If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 580 Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 581 Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède. Profitez de l'occasion pour vérifier régulièrement que les ceintures ne sont pas effilochées, entaillées, ou ne paraissent pas exagérément usées. ATTENTION ■ Détérioration et usure des ceintures de sécurité...
Page 582 SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English. Sacs de sécurité...
Page 583 Sacs de sécurité gonflables latéraux et rideau Sacs de sécurité gonflables latéraux Participent à la protection du thorax des occupants des sièges avant. Sacs de sécurité gonflables rideau Participent principalement à la protection de la tête des occupants assis dans les sièges des places extérieures.
Page 584 Composition du système de sacs de sécurité gonflables Sacs de sécurité gonflables Témoin d'alerte SRS rideau Sac de sécurité gonflable Sacs de sécurité gonflables conducteur latéraux Capteur de la position du Sac de sécurité gonflable siège conducteur passager avant Contacteur de boucle de Capteurs sacs ceinture...
Page 585 Votre véhicule est équipé de SACS DE SÉCURITÉ GONFLABLES INTELLIGENTS (ADVANCED AIRBAGS) conçus selon les normes de sécurité américaines applicables aux véhicules à moteur (FMVSS208). Le système de sacs de sécurité gonflables régule la puissance de déploiement des sacs de sécurité gonflables conducteur et passager avant.
Page 586 ATTENTION ■ Précautions avec les sacs de sécurité gonflables SRS Respectez les précautions suivantes avec les sacs de sécurité gonflables. À défaut, des blessures graves, voire mortelles, pourraient s'ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leur ceinture de sécurité...
Page 587 être grièvement blessés ou tués par le déploiement d'un sac de sécurité gonflable. Installez dans un siège de sécurité enfant les enfants trop jeunes pour pouvoir utiliser la ceinture de sécurité. Toyota recommande vivement que les nourrissons et les jeunes enfants soient installés sur le siège arrière du véhicule et convenablement attachés.
Page 588 ATTENTION ■ Précautions avec les sacs de sécurité gonflables SRS ● Ne pas s'asseoir sur le bord du siège et ne pas s'appuyer contre la planche de bord. ● Ne laissez pas un enfant rester debout devant le sac de sécurité gonflable SRS passager avant ou bien s'asseoir sur les genoux du passager avant.
Page 589 ATTENTION ■ Précautions avec les sacs de sécurité gonflables SRS ●Ne rien fixer ou disposer sur le tableau de bord, la garniture centrale du moyeu de volant de direction ou la partie inférieure de la planche de bord. Au déploiement des sacs de sécurité gonflables SRS conducteur, passager avant et genoux, tout objet risque de se transformer en projectile.
Page 590 ● Si les parties renfermant les sacs de sécurité gonflables SRS, telles que la garniture du moyeu de volant et les garnitures de montants avant et arrière, apparaissent abîmées ou craquelées, faites-les remplacer par votre concessionnaire Toyota.
Page 591 ■ Modification et mise au rebut des éléments du système de sacs de sécurité gonflables SRS Consultez impérativement votre concessionnaire Toyota si vous avez besoin d'intervenir sur votre véhicule ou de procéder à l'une des modifications suivantes. Les sacs de sécurité gonflables SRS risquent de ne pas fonctionner correctement ou de se déployer (gonfler) accidentellement, provoquant ainsi...
Page 592 Alphabetical index Alphabetical index A/C.....268, 275, 283, 286 Alarm......... 116 ABS ...........223 Antenna ......301, 344 Active head restraints ....75 Anti-lock brake system ... 223 Air conditioning filter....493 Armrest ........422 Air conditioning system Audio input....... 339 Air conditioning filter....493 Audio system Front automatic air Antenna......
Page 593 Alphabetical index Back-up lights Care Replacing light bulbs .... 510 Exterior........440 Wattage ........ 586 Interior ........443 Back door Seat belts ......444 Back door ....... 60 Cargo capacity ......242 Smart key system....35 Cargo hooks ......424 Wireless remote control..48 CD changer.......304 Battery CD player ........304 Checking ......
Page 594 Alphabetical index Child-protectors ......56 Daytime running light Cleaning system ........204 Exterior........440 Defogger Interior ........443 Rear window ......289 Seat belts ......444 Side mirrors......289 Clock .........191, 414 Dimension ........ 572 Compass........435 Dinghy towing ......265 Condenser ........471 Display Console box ......401 Trip information .....
Page 595 Alphabetical index Electric power steering... 223 Engine Electronic key Compartment ......463 If your electronic key Engine switch ....170, 174 battery is discharged..558 Hood........457 Emergency flashers How to start the Switch........518 engine ......170, 174 Emergency, in case of Identification number.....573 If a warning message is If the engine will not start ..554 displayed......
Page 596 Alphabetical index Floor mat........423 Garage door opener ....429 Fluid Gas station information ..636 Brake........472 Gauges........185 Washer........477 Glove box ......... 400 Fog lights Grocery bag hooks ....424 Replacing light bulbs .....510 Switch........206 Hands-free system Wattage.........586 (for cellular phone)....363 Front automatic air Hazard lights switch ....
Page 597 Alphabetical index Jack Lock steering column..172, 175 Positioning a floor jack ..459 Luggage cover ......425 Vehicle-equipped jack ..540 Jack handle......540 Maintenance Do-it-yourself Keyless entry......48 maintenance .......453 Keys General maintenance....449 Electronic key ......32 Maintenance data....572 Engine switch ....170, 174 Maintenance requirements..446 If the electronic key does Maintenance data.....447...
Page 598 Alphabetical index Parking brake ......183 Replacing Parking lights Fuses ........499 Replacing light bulbs .....510 Key battery......496 Switch........200 Light bulbs......510 Wattage.........586 Tires ........540 Personal/interior lights Reporting safety defects for Switch........397 U.S. owners......608 Wattage.........586 Roof luggage carrier....241 Power outlet ......416 Power windows ......101 Seat belts...
Page 599 Alphabetical index Service reminder Sun visors.........412 indicators ......187 Switch Shift lever Emergency flasher switch ..518 Automatic transmission ..177 Engine switch ....170, 174 If the shift lever cannot Fog light switch .....206 be shifted from P....556 Hazard light switch ....518 Shift lock system.....
Page 600 Alphabetical index Tires Warning lights Chains ........243 Anti-lock brake system..529 Checking .......478 Brake assist system ....529 If you have a flat tire....540 Brake system ......528 Inflation pressure....487 Charging system ....529 Information ......590 Electric power steering Replacing ......540 system ........
Page 601 What to do if... What to do if... If you have a flat tire A tire punctures P. 540 P. 554 If the engine will not start The engine does not start P. 113 Engine immobilizer system P. 560 If the battery is discharged If the shift lever cannot be shifted The shift lever cannot be P.
Page 602: Warning Lights
What to do if... If a warning light turns on or a A warning light or indicator light P. 528 warning buzzer sounds... comes on ■Warning lights Brake system warning Low fuel level warning light light P. 531 Driver’s seat belt reminder light P.
Page 603 What to do if... ABS warning light Automatic transmission fluid temper- ature warning light P. 531 Tire pressure warning light P. 529 P. 531 Electric power steering Cruise control indicator warning light light P. 529 P. 529 Slip indicator light P.
Page 604: Gas Station Information
Cold tire inflation P. 584 pressure Engine oil capacity P. 576 (Drain and refill ⎯ reference) Toyota Genuine Motor Oil or equivalent Oil grade: P. 576 ILSAC multigrade engine oil Recommended oil viscosity: Engine oil type 2.7 L 4-cylinder (1AR-FE) engine 5W-20 and 0W-20 3.5 L V6 (2GR-FE) engine...

Toyota 2012 Highlander Owner's Manual

Quick Links

Related Manuals for Toyota 2012 Highlander

Summary of Contents for Toyota 2012 Highlander

Table of Contents