Toyota Highlander 2020 Owner's Manual page 308

308
4-5. Using the driving support systems
WARNING
The road conditions listed
●
(Guidelines for selecting each
mode:P.308) are for reference
only. There is a chance that the
function may not be the most
appropriate in terms of road
conditions such as pitch, slip-
periness, undulation, etc. Thor-
oughly check the road
conditions before driving.
Guidelines for selecting
each mode
Control that is suitable for the
following road conditions can be
performed by switching to either
of the two modes. Select a
mode that is appropriate for the
road condition.
Mud & Sand mode
■
Suitable for driving on roads
with increased driving resis-
tance such as sandy roads,
muddy roads, etc.
Rock & Dirt mode
■
Suitable for driving in bumpy
road conditions, such as on
unpaved forest roads.
HIGHLANDER_U
Changing the mode
Dynamic Torque Control
■
AWD vehicles
1
Mud & Sand mode
When the switch is pressed while
not in Mud & Sand mode, the sys-
tem switches to Mud & Sand mode
and the Mud & Sand mode indica-
tor, VSC OFF indicator and PCS
warning light illuminate on the
multi-information display.
2 Normal mode
Mode that performs AWD, brake
and drive force control suitable for
driving on general roads. Use nor-
mal mode when not driving
off-road.
The driving mode returns to normal
mode if the switch is pressed while
in Mud & Sand mode or Rock & Dirt
mode.
3
Rock & Dirt mode
When the switch is pressed while
not in Rock & Dirt mode, the sys-
tem switches to Rock & Dirt mode
and the Rock & Dirt mode indicator
illuminates on the multi-information
display.