Toyota Highlander 2020 Owner's Manual page 381

Programming the Home-
®
Link
■
Before programming Home-
®
Link
 During programming, it is pos-
sible that garage doors,
gates, or other devices may
operate. For this reason,
make sure that people and
objects are clear of the
garage door or other devices
to prevent injury or other
potential harm.
 It is recommended that a new
battery be placed in the
remote control transmitter for
more accurate programming.
 Garage door opener motors
manufactured after 1995 may
be equipped with rolling code
protection. If this is the case,
you may need a stepladder or
other sturdy, safe device to
reach the "Learn" or "Smart"
button on the garage door
opener motor.
■
Programming HomeLink
1
Steps through
formed within 60 seconds, oth-
erwise the HomeLink
light will stop flashing and pro-
gramming will not be success-
fully completed.
1
Press and release the Home-
®
Link button you want to pro-
gram and check that the
HIGHLANDER_U
5-5. Using the other interior features
2
Keep the HomeLink
in view while programming.


®
3
must be per-
3
®
indicator
®
HomeLink indicator light
flashes (orange).
Point the remote control
transmitter for the device at
the rear view mirror, 1 to 3 in.
(25 to 75 mm) from the
®
HomeLink buttons.
®
indicator light
Vehicles with auto anti-glare
inside rear view mirror
Vehicles with Digital Rearview
Mirror
Program a device.
381
5