Table of Contents
Advertisement
408
6-3. Do-it-yourself maintenance
Checking the radiator and
condenser
Check the radiator and con-
denser and clear away any for-
eign objects. If either of the
above parts is extremely dirty or
you are not sure of their condi-
tion, have your vehicle
inspected by your Toyota dealer.
WARNING
When the engine is hot
■
Do not touch the radiator or con-
denser as they may be hot and
cause serious injuries, such as
burns.
Checking and adding the
brake fluid
Checking fluid level
■
The brake fluid level should be
between the "MAX" and "MIN"
lines on the tank.
Adding fluid
■
Make sure to check the fluid
type and prepare the necessary
item.
Fluid type
HIGHLANDER_U
SAE J1703 or FMVSS No.116 DOT
3 brake fluid
Item
Clean funnel
Brake fluid can absorb moisture
■
from the air
Excess moisture in the brake fluid
can cause a dangerous loss of brak-
ing efficiency. Use only newly
opened brake fluid.
WARNING
When filling the reservoir
■
Take care as brake fluid can harm
your hands and eyes and damage
painted surfaces.
If fluid gets on your hands or in
your eyes, flush the affected area
with clean water immediately.
If you still experience discomfort,
see a doctor.
NOTICE
If the fluid level is low or high
■
It is normal for the brake fluid level
to go down slightly as the brake
pads wear out or when the fluid
level in the accumulator is high.
If the reservoir needs frequent
refilling, there may be a serious
problem.
Battery
Check the battery as follows.
Battery exterior
■
Make sure that the battery termi-
nals are not corroded and that
there are no loose connections,
cracks, or loose clamps.
Advertisement
Chapters
Table of Contents
