Toyota Highlander 2020 Owner's Manual page 290

290
4-5. Using the driving support systems
Parking Support Brake
■
function (rear-crossing
vehicles) (if equipped)
Rear radar sensors are used to
detect approaching vehicles in
the detection area behind the
vehicle when backing up.
(P.302)
WARNING
Limitations of the Parking
■
Support Brake system
Do not overly rely on the system,
as doing so may lead to an acci-
dent.
The driver is solely responsible
●
for safe driving. Always drive
carefully, taking care to observe
your surroundings. The Parking
Support Brake system is
designed to provide support to
lessen the severity of collisions.
However, it may not operate in
some situations.
The Parking Support Brake sys-
●
tem is not designed to stop the
vehicle completely. Additionally,
even if the system has stopped
the vehicle, it is necessary to
depress the brake pedal imme-
diately as brake control will be
canceled after approximately 2
seconds.
HIGHLANDER_U
NOTICE
If "PKSB Unavailable" is dis-
■
played on the multi-informa-
tion display and the PKSB
OFF indicator is flashing
If this message is displayed
immediately after the engine
switch is changed to ON, operate
the vehicle carefully, paying atten-
tion to your surroundings. It may
be necessary to drive the vehicle
for a certain amount of time
before the system returns to nor-
mal. (If the system is not return to
normal after driving for a while,
clean the sensors and their sur-
rounding area on the bumpers.)
Enabling/Disabling the
Parking Support Brake
The Parking Support Brake can
be enabled/disabled on the
multi-information display. All of
the Parking Support Brake func-
tions (static objects and
rear-crossing vehicles) are
enabled/disabled simultane-
ously.
Use the meter control switches
to enable/disable the parking
support brake. (P.96)
1
Press or to select
2
Press or to select
and then press
When the Parking Support Brake is
disabled, the PKSB OFF indicator
(P.76) illuminates on the instru-
ment cluster.
To re-enable the system when it
was disabled, select
multi-information display, select
.
.
on the