Toyota Highlander 2020 Owner's Manual page 438

438
6-3. Do-it-yourself maintenance
1
Insert a small flathead screw-
driver, etc. into either the
right or left hole of the lens.
2
Push the screwdriver side-
ways in the direction of the
arrow shown in the illustra-
tion, disengage the hook, and
then remove the lens.
To prevent damage to the vehicle,
wrap the tip of the screwdriver with
tape, etc.
3
Remove the light bulb.
4
Install a new light bulb.
HIGHLANDER_U
5
Install the lens.
Hooks
1
Fit the lens into either the
right or left hooks.
2
Push the lens into place.
After installation, confirm that the
lens is properly installed by gently
pulling it.
6
Install the cover.