Table of Contents
Advertisement
146
3-3. Adjusting the seats
If 2 or more keys are in the vehicle,
the driving position cannot be
recorded properly.
1
Check that the shift lever is in
P.
2
Turn the engine switch to
ON.
3
Recall the driving position
that you want to record.
4
While pressing the recalled
button, press and hold the
door lock switch (either lock
or unlock) until the buzzer
sounds.
If the button could not be regis-
tered, the buzzer sounds continu-
ously for approximately 3 seconds.
■
Cancelation procedure
Carry only the key you want to
cancel and then close the
driver's door.
If 2 or more keys are in the vehicle,
the driving position cannot be can-
celed properly.
1
Turn the engine switch to
ON.
2
While pressing the "SET" but-
ton, press and hold the door
lock switch (either lock or
HIGHLANDER_U
unlock) until the buzzer
sounds twice.
If the button could not be canceled,
the buzzer sounds continuously for
approximately 3 seconds.
■
Recall procedure
Make sure that the doors are
locked before recalling the driv-
ing position. Carry the electronic
key that has been registered to
the driving position, and then
unlock and open the driver's
door using the smart key system
or wireless remote control.
The driving position will move to the
recorded position.
If the driving position is in a position
that has already been recorded, the
seat and outside rear view mirrors
will not move.
■
Recalling the driving position
using the memory recall func-
tion
●
Different driving positions can be
registered for each electronic key.
Therefore, the driving position that
is recalled may be different
depending on the key being car-
ried.
●
If a door other than the driver's
door is unlocked with the smart
key system, the driving position
cannot be recalled. In this case,
press the driving position button
which has been set.
■
Customization
Some functions can be customized.
(P.515)
Advertisement
Chapters
Table of Contents
