Table of Contents
Advertisement
304
4-5. Using the driving support systems
■
Conditions under which the
Parking Support Brake func-
tion (rear-crossing vehicles)
will not detect a vehicle
The Parking Support Brake function
(rear-crossing vehicles) is not
designed to detect the following
types of vehicles and/or objects:
●
Vehicles approaching from directly
behind
●
Vehicles backing up in a parking
space next to your vehicle
●
Vehicles that the sensors cannot
detect due to obstructions
●
Vehicles which suddenly acceler-
ate or decelerate near your vehi-
cle
●
Guardrails, walls, signs, parked
vehicles and similar stationary
objects
●
Small motorcycles, bicycles,
pedestrians, etc.
●
Vehicles moving away from your
vehicle
●
Vehicles approaching from the
parking spaces next to your vehi-
*
cle
●
Objects which are extremely close
to a radar sensor
●
Vehicles which are approaching
from the right or left at the rear of
the vehicle at a traveling speed of
less than approximately 5 mph (8
km/h)
●
Vehicles which are approaching
from the right or left at the rear of
the vehicle at a traveling speed of
more than approximately 15 mph
(24 km/h)
HIGHLANDER_U
*
■
If the Parking Support Brake is
enabled and brake control is per-
formed, a buzzer will sound to notify
the driver.
■
In some situations such as the fol-
lowing, the Parking Support Brake
function (rear-crossing vehicles)
may operate even though there is
no possibility of a collision.
●
●
*
*
●
: Depending on the conditions,
detection of a vehicle and/or
object may occur.
PKSB buzzer
Situations in which the system
may operate even though there
is no possibility of a collision
When the parking space faces a
street and vehicles are being
driven on the street
When a detected vehicle turns
while approaching the vehicle
When a vehicle passes by the
side of your vehicle
Advertisement
Chapters
Table of Contents
