Table of Contents
Advertisement
WARNING
To prevent injury
■
Before performing any light bulb
replacement procedure, be sure
to turn the engine switch off. Fail-
ure to do so may result in burns
from hot components or a part of
your body may get caught on an
operating component, possibly
causing serious injury.
Replacing light bulbs
■
Turn off the lights. Do not
●
attempt to replace the bulb
immediately after turning off the
lights.The bulbs become very
hot and may cause burns.
Do not touch the glass portion
●
of the light bulb with bare
hands. When it is unavoidable
to hold the glass portion, use
and hold with a clean dry cloth
to avoid getting moisture and
oils on the bulb. Also, if the bulb
is scratched or dropped, it may
blow out or crack.
Fully install light bulbs and any
●
parts used to secure them. Fail-
ure to do so may result in heat
damage, fire, or water entering
the light unit. This may damage
the lights or cause condensa-
tion to build up on the lens.
Do not attempt to repair or dis-
●
assemble light bulbs, connec-
tors, electric circuits or
component parts.
Doing so may result in death or
serious injury due to electric
shock.
To prevent damage or fire
■
Make sure bulbs are fully
●
seated and locked.
Check the wattage of the bulb
●
before installing to prevent heat
damage.
HIGHLANDER_U
6-3. Do-it-yourself maintenance
439
6
Advertisement
Chapters
Table of Contents
