58
1-2. Child safety
WARNING
Do not use a seat belt
■
extender
If a seat belt extender is used
when installing a child restraint
system, the seat belt will not
securely hold the child restraint
system, which could cause death
or serious injury to the child or
other passengers in the event of
sudden braking, sudden swerv-
ing or an accident.
Child restraint system
fixed with a child restraint
LATCH anchor
Child restraint LATCH
■
anchors
LATCH anchors are provided for
the outboard second seats.
When installing in the rear
■
outboard seats
Install the child restraint system
in accordance to the operation
manual enclosed with the child
restraint system.
1
Adjust the seat
If there is a gap between the child
seat and the seatback, adjust the
seatback angle until good contact is
achieved.
HIGHLANDER_U
2
Remove the head restraint if
it interferes with your child
restraint system. (P.147)
3
Widen the gap between the
seat cushion and seatback
slightly.
With flexible lower attach-
ments
4
Latch the hooks of the lower
attachments onto the LATCH
anchors.
For owners in Canada:
The symbol on a child
restraint system indicates
the presence of a lower con-
nector system.
Canada only