WARNING
Do not attach objects, such as
●
stickers, transparent stickers,
etc., to the outer side of the
windshield in front of the front
camera (shaded area in the
illustration).
From the top of the windshield
to approximately 0.4 in. (1 cm)
below the bottom of the front
camera
Approximately 7.9 in. (20 cm)
(Approximately 4.0 in. [10 cm]
to the right and left from the
center of the front camera)
If the part of the windshield in
●
front of the front camera is
fogged up or covered with con-
densation, or ice, use the wind-
shield defogger to remove the
fog, condensation, or ice.
(
P.329, 335)
If water droplets cannot be
●
properly removed from the area
of the windshield in front of the
front camera by the windshield
wipers, replace the wiper insert
or wiper blade.
Do not attach window tint to the
●
windshield.
Replace the windshield if it is
●
damaged or cracked.
After replacing the windshield,
the front camera must be recali-
brated. Contact your Toyota
dealer for details.
HIGHLANDER_U
4-5. Using the driving support systems
Do not allow liquids to contact
●
the front camera.
Do not allow bright lights to
●
shine into the front camera.
Do not dirty or damage the front
●
camera.
When cleaning the inside of the
windshield, do not allow glass
cleaner to contact the lens of
the front camera. Also, do not
touch the lens.
If the lens is dirty or damaged,
contact your Toyota dealer.
Do not subject the front camera
●
to a strong impact.
Do not change the installation
●
position or direction of the front
camera or remove it.
Do not disassemble the front
●
camera.
Do not modify any components
●
of the vehicle around the front
camera (inside rear view mirror,
etc.) or ceiling.
Do not attach any accessories
●
to the hood, front grille or front
bumper that may obstruct the
front camera. Contact your Toy-
ota dealer for details.
If a surfboard or other long
●
object is to be mounted on the
roof, make sure that it will not
obstruct the front camera.
Do not modify the headlights or
●
other lights.
229
4