Toyota Highlander 2020 Owner's Manual page 80

80
2-1. Instrument cluster
Clock (P.82)
Speedometer
Fuel gauge
Displays the quantity of fuel remaining in the tank
Odometer and trip meter display (P.81)
Shift position display (P.204)
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F
(50°C). Low outside temperature indicator comes on when the ambient
temperature is 37°F (3°C) or lower.
Engine coolant temperature gauge
Displays the engine coolant temperature
The meters and display illumi-
■
nate when
The engine switch is in ON.
Outside temperature display
■
In the following situations, the cor-
●
rect outside temperature may not
be displayed, or the display may
take longer than normal to
change:
• When stopped, or driving at low
speeds (less than 12 mph [20
km/h])
• When the outside temperature
has changed suddenly (at the
entrance/exit of a garage, tunnel,
etc.)
When "--" or "E" is displayed, the
●
system may be malfunctioning.
Take your vehicle to your Toyota
dealer.
Liquid crystal display
■
Small spots or light spots may
appear on the display. This phenom-
enon is characteristic of liquid crys-
tal displays, and there is no problem
continuing to use the display.
Customization
■
The meters can be customized on
of the multi-information display.
(P.89, 99)
HIGHLANDER_U
WARNING
The information display at
■
low temperatures
Allow the interior of the vehicle to
warm up before using the liquid
crystal information display. At
extremely low temperatures, the
information display monitor may
respond slowly, and display
changes may be delayed.
For example, there is a lag
between the driver's shifting and
the new gear number appearing
on the display. This lag could
cause the driver to downshift
again, causing rapid and exces-
sive engine braking and possibly
an accident resulting in death or
injury.
NOTICE
To prevent damage to the
■
engine and its components
Do not let the indicator needle
●
of the tachometer enter the red
zone, which indicates the maxi-
mum engine speed.