Table of Contents
Advertisement
156
3-4. Adjusting the steering wheel and mirrors
The setting display will be dis-
played.
3
Press
enable ("ON")/disable
("OFF") the automatic
anti-glare function.
The icons will disappear if a button
is not operated for approximately 5
seconds or more.
Adjusting the display (digital
■
mirror mode)
If the displayed image is adjusted,
●
it may appear distorted. This is not
a malfunction.
If the brightness of the Digital
●
Rearview Mirror is set too high, it
may cause eye strain. Adjust the
Digital Rearview Mirror to an
appropriate brightness. If your
eyes become tired, change to
optical mirror mode.
The brightness of the Digital Rear-
●
view Mirror will change automati-
cally according to the brightness
of the area in front of your vehicle.
To prevent the light sensors
■
from malfunctioning
To prevent the light sensors from
malfunctioning, do not touch or
cover them.
HIGHLANDER_U
Observe the following precau-
tions.
Failure to do so may result in
or
to
death or serious injury.
■
●
●
The size of the vehicles and other
objects may look different when in
digital mirror mode and optical
mirror mode.
When backing up, make sure to
directly check the safety of the
area around your vehicle, espe-
cially behind the vehicle.
Additionally, if a vehicle
approaches from the rear in the
dark, such as at night, the sur-
rounding area may appear dim.
■
If the driver continues using the
Digital Rearview Mirror while
smoke or odor comes from the
mirror, it may result in fire. Stop
using the system immediately and
contact your Toyota dealer.
WARNING
While driving
Do not adjust the position of the
Digital Rearview Mirror or adjust
the display settings while driv-
ing.
Stop the vehicle and operate
the Digital Rearview Mirror con-
trol switches.
Failure to do so may cause a
steering wheel operation error,
resulting in an unexpected acci-
dent.
Always pay attention to the
vehicle's surroundings.
To prevent causes of fire
Advertisement
Chapters
Table of Contents
