Headlight Aim - Toyota Highlander 2020 Owner's Manual

When replacing light bulbs
■
Toyota recommends that you use
genuine Toyota products designed
for this vehicle. Because certain
bulbs are connected to circuits
designed to prevent overload,
non-genuine parts or parts not
designed for this vehicle may be
unusable.
WARNING
To prevent system break-
■
downs and vehicle fire
Observe the following precau-
tions.
Failure to do so may cause dam-
age to the vehicle, and possibly a
fire or injury.
Never use a fuse of a higher
●
amperage rating than that indi-
cated, or use any other object in
place of a fuse.
Always use a genuine Toyota
●
fuse or equivalent.
Never replace a fuse with a
wire, even as a temporary fix.
Do not modify the fuses or fuse
●
boxes.
NOTICE
Before replacing fuses
■
Have the cause of electrical over-
load determined and repaired by
your Toyota dealer as soon as
possible.
HIGHLANDER_U
6-3. Do-it-yourself maintenance

Headlight aim

Vertical movement adjust-
ing bolts
Adjustment bolt A
Adjustment bolt B
Before checking the head-
light aim
 Make sure the vehicle has a
full tank of gasoline and the
area around the headlight is
not deformed.
 Park the vehicle on level
ground.
 Make sure the tire inflation
pressure is at the specified
level.
 Have someone sit in the
driver's seat.
 Bounce the vehicle several
times.
431
6