Toyota Highlander 2020 Owner's Manual page 437

3
Remove the light bulb.
4
Install a new light bulb, and
then install the bulb base to
the light unit by inserting it
and turning it clockwise.
After installing the bulb base, wig-
gle it lightly to make sure it is
securely installed and turn on the
back-up lights to visually check that
there is no light leaking from
between the bulb base and light
unit.
5
Install the cover.
Align the tabs of the cover with the
grooves and install the cover.
HIGHLANDER_U
6-3. Do-it-yourself maintenance
■
License plate lights
1
Remove the cover.
Using a flathead screwdriver,
remove the cover.
To prevent damage to the vehicle,
wrap the tip of the flathead screw-
driver with tape, etc.
2
Remove the lens.
Lens
Hook
437
6