Toyota Highlander 2020 Owner's Manual page 90

90
2-1. Instrument cluster

Fuel economy display
Select to change the average fuel
consumption display between after
start/after reset. (P.84)

Select to display/not display the
audio system linked display.

Select to change the displayed con-
tent of the following:
• Display contents
Select to display/not display the
AWD control (if equipped). (P.87)
• Drive information type
Select to change the drive informa-
tion type display between after
start/after reset.
• Drive information items
Select to set the first and second
items of the drive information dis-
play to any of the following: aver-
age vehicle
speed/distance/elapsed time.
 Pop-up display
Select to enable/disable pop-up
displays for each relevant system.
 Multi-information display off
Displays a blank screen.
 Default setting
Select to reset the meter display
settings to the default setting.
Vehicle functions and set-
■
tings that can be changed
P.515
HIGHLANDER_U
Suspension of the settings dis-
■
play
Some settings cannot be changed
●
while driving. When changing set-
tings, park the vehicle in a safe
place.
If a warning message is displayed,
●
operation of the settings display
will be suspended.
Pop-up displays
■
Depending on the pop-up display,
the currently displayed item in the
message display area may be tem-
porarily not displayed. The item will
be displayed after the pop-up dis-
play is no longer displayed.
WARNING
Cautions during setting up
■
the display
As the engine needs to be run-
ning during setting up the display,
ensure that the vehicle is parked
in a place with adequate ventila-
tion. In a closed area such as a
garage, exhaust gases including
harmful carbon monoxide (CO)
may collect and enter the vehicle.
This may lead to death or a seri-
ous health hazard.
NOTICE
During setting up the display
■
To prevent battery discharge,
ensure that the engine is running
while setting up the display fea-
tures.
Warning message display
( )
Select to display warning mes-
sages and measures to be
taken if a malfunction is
detected. (P.460)