Table of Contents
Advertisement
WARNING
Do not attach stickers to the
●
sensor or surrounding area on
the rear bumper.
Do not subject a sensor or its
●
surrounding area on the rear
bumper to a strong impact.
If a sensor is moved even
slightly off position, the system
may malfunction and vehicles
may not be detected correctly.
In the following situations, have
your vehicle inspected by your
Toyota dealer.
• A sensor or its surrounding area
is subject to a strong impact.
• If the surrounding area of a sen-
sor is scratched or dented, or
part of them has become dis-
connected.
Do not disassemble the sensor.
●
Do not modify the sensor or sur-
●
rounding area on the rear
bumper.
If a sensor or the rear bumper
●
needs to be removed/installed
or replaced, contact your Toyota
dealer.
Do not paint the rear bumper
●
any color other than an official
Toyota color.
Blind Spot Monitor operation
Vehicles that can be detected by the Blind Spot Monitor
■
The Blind Spot Monitor uses rear side radar sensors to detect the fol-
lowing vehicles traveling in adjacent lanes and advises the driver of
the presence of such vehicles via the indicators on the outside rear
view mirrors.
HIGHLANDER_U
4-5. Using the driving support systems
Turning the Blind Spot
Monitor on/off
Use the meter control switches
to turn on/off the function.
4.2-inch display
1
Press
control switches and select
.
2
Press
control switches to select
and then press
7-inch display
1
Press
control switches and select
.
2
Press
control switches to select
and then press
273
or
of the meter
or
of the meter
.
or
of the meter
or
of the meter
.
4
Advertisement
Chapters
Table of Contents
