Clutch Solenoid Motor Fan Pcb (Dadf); Removing The Adf Motor(M1); Removing The Release Motor(M2) - Canon DADF-AG1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Release Motor(M2)

Clutch Solenoid Motor Fan PCB (DADF)

Removing the ADF Motor(M1)

1) Open the feeder cover.
2) Remove the rear cover."Removing the Rear Cover"(page 4-4).
3) Remove the ADF motor unit.
- Connector 1 pc.
- Tension spring 1 pc.
- Screw 2 pcs.
x2
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Release Motor(M2)
1) Open the feeder cover.
2) Open the DADF.
3) Detach the front
4) Close the DADF.
5) Remove the release motor support plate.
6) Remove the release motor.
F-4-20

Removing the Release Motor(M2)

cover."Removing the Front Cover"(page 4-4).
- Connector 2 pcs.
- Screw 5 pcs.
x5
x2
- Screw 2 pcs.
x2
4-10
F-4-21
F-4-22
4-10