4. Disassembly/Assembly
■ Procedure
1. Disconnect the connector [1], and open the Edge Saddle [2] and the Wire Saddle [3].
1x
2x
[1]
[2]
[3]
2. Open the Wire Saddle [1] and pull out the harness [2] from the hole [A].
[1]
[A]
[2]
1x
3. Remove the Pickup Unit [1].
• 4 Screws [2]
4x
[1]
[2]
[2]
Removing the Pullout Motor
■ Preparation
1.
"Removing the Rear Cover" on page 23
31