Removing The Guide Swing Motor (M3); Removing The Guide Swing Motor (M3) - Canon STAPLER SORTER-L1/MS-C1 Service Manual

E. Removing the Guide Swing
Motor (M3)
1) Remove the two screws [2], and detach
the alignment cover [1].
2) Remove the two screws [5], and
disconnect the connector [4]; then, detach
the guide swing motor [3].
Caution:
When mounting the alignment cover, be
sure to fit the harness in the wire saddle
so as to avoid biting of the bin harness.
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
(Stapler soter only)
CHAPTER 3 MECHANICAL SYSTEM
[2]
[1]
[3]
[5]
[4]
Figure 3-211
[2]
3-7