Checking The Operation After Making The Settings; Checking The Ping When Ipsec Is In Operation; Setting By The Device - Canon iR-ADV Security Kit-B1 Service Manual

3
Installation > Checking the Operation After Making the Settings > Setting by the Device

Checking the Operation After Making the Settings

Checking the Ping When IPSec is in Operation

In IEEE2600 certification, all communication is encrypted by IPSec when the device
communicates via network. Therefore, encryption communication needs to be established
with the other party's PC when sending a ping from the device. Ask the user to check the
connection.
Refer to the following procedure if it is necessary to assume troubleshooting and understand
the connection work performed by the user. Under this environment, the response of ping
can be confirmed, which has been sent to the PC with which the encryption communication
has been established.The procedure introduces the setting by which the communication only
between a device connected to the local network and a PC on which Windows7 operates
isenabled.

Setting by the Device

Complete the device setting before executing
Settings/Registration >[Preferences] > [Device Management] > [Unified Security Settings].
Settings/Registration > Preferences > Network > TCP/IP Settings > IPSec Settings
Press the Reg button when no policy has been specified.
Press Edit when changing a policy which has already been created.
3 Installation > Checking the Operation After Making the Settings > Setting by the Device
Enter a policy name and perform each setting in order.
Selector Settings
Local Address > All IP Addresses
Remote Address > All IP Addresses
F-3-2
3-5
F-3-3
F-3-4
3-5