Outgoing Call Blocking; Unconditional Call Forwarding Management - Epygi Manual III User Manual

To terminate the call
Dial to park a call (system will play the extension number and SIP username of the first available Call Park extension). Go to
Call Park
the remote location and call the Call Park extension to pick up the parked call. If enabled, the system will ask for the password

authentication. If successfully entered, the parked call will be resumed.
To use the Call Park feature, at least one Call Park extension should be created on the QX IP PBX.
The Call Parking is valid within the timeout defined by QX IP PBX's administrator, during which hold music (if configured)
will be played to the parked party. Contact your system administrator if you need the call parking timeout to be modified. When the Call
Attention:
Park timeout expires, a short ring notification will be sent to the phone initiating the call parking, and if no one picks up the parked call
or if the phone is off the hook, the parked call will be automatically disconnected.
Hold the current call (
Directed Call Park
If the five second timeout is exceeded, then the QX IP PBX will consider it as an attempt for retrieving the parked call.
Go to the remote location and call the Call Park extension to pick up the parked call. If enabled, the system will ask for the password
Attention:
authentication. If successfully entered, the parked call will be resumed.
To use the Directed Call Park feature, multiple Call Park extensions should be created on the QX IP PBX.
The Call Parking is valid within the timeout defined by QX IP PBX's administrator, during which hold music (if configured)
will be played to the parked party. Contact your system administrator if you need the call parking timeout to be modified. When the Call
Attention:
Park timeout expires, a short ring notification will be sent to the phone initiating the call parking, and if no one picks up the parked call
or if the phone is off the hook, the parked call will be automatically disconnected.
For PBX services on IP phones accessible during the call, refer to the "Epygi IP PBX Features on Epygi Supported IP phones" document on the
Epygi's Web portal.

Outgoing Call Blocking

Unconditional Call Forwarding Management

Using the Change the Forwarding Number option will change the first entry in the Unconditional Call Forwarding table with Auto call
type to the inserted Forwarding Number. Any other entries with Auto call type, as well as with other call types will not be modified.
Please Note:
* Besides Any Address/Other Addresses entry of the Unconditional Call Forwarding table this toggling also affects all those entries that have Toggle from
Handset option selected. The states of those entries will be set equal to the state of Any Address/Other Addresses entry after toggling.
QX50/QX200/QX2000; (SW Version 6.0.x)
) and dial the Call Park extension number within the five second timeout.

Insert the extension's password and press
Enable Outgoing Call Blocking

Dial a
to be blocked and press
Called Number

(when this menu is accessed, the Unconditional Call Forwarding service
Unconditional Call Forwarding Management
Toggle (enable or disable) the Unconditional

Forwarding service again*
QX50/QX200/QX2000 Manual III: Extension User's Guide

(available on the dial tone)
Outgoing Call Blocking

Disable Outgoing Call Blocking
Dial a
to be unblocked and press
Called Number

is already getting toggled)
Change the Forwarding Number
Dial a new
and press
Forwarding Number
Confirm the new Forwarding Number with
press to dial a new Forwarding Number.




or



+ Call
Park Extension
Number+

9