Voicemail Profile - Epygi Manual III User Manual

The Intercom page contains the following components:
The Intercom drop-down list has three available sections:
Allow Activation on Request - this selection enables the
Intercom service for calls that are made through a call
•
routing rule of the PBX-Intercom call type. Please contact
your system administrator to ensure a corresponding rule
is available for your extension.
Activate Always - this selection unconditionally enables
the Intercom service on the extension.
•
Disabled - this selection disables the Intercom service.
•
The Activation signal drop-down list has three available
sections:
Ring Only If Requested – this selection allows you to
play audible signal if the Play audible signal before
•
Intercom activation checkbox is enabled in the call
routing rule of the PBX-Intercom call type.
Ring On Activation this selection allows you to play
audible signal before Intercom activation whether the
•
checkbox in the call routing is enabled or not.
Play audible signal before Intercom activation
Silent Activation this selection allows you to activate the Intercom service silently, without any audible signal whether the Play audible signal
before Intercom activation checkbox in the call routing is enabled or not.
•
Intercom will not work if the called extension is in call. If this service is enabled along with Many Extension Ringing, Call Hunting or
Forwarding services, Intercom will not take effect and other high priority services will be primary.
Attention:

Voicemail Profile

The Voicemail Profile page allows you to activate the voicemail
profile based on Caller ID and Presence States.
The Voicemail Profile radio buttons allows you to configure the
voice mail profile settings.
Use Profile As Requested - this selection enables the
voicemail profile settings for calls that are made
•
through a call routing rule of the PBX-Voicemail call
type. Please contact your system administrator to
ensure a corresponding rule is available for your
extension.
Use Default Voicemail Settings selection enables the
default voicemail profile settings. No profile will be
•
used, regardless of how the call has arrived to
extension.
Use Specific Profile drop-down list allows the
selection of a previously created voicemail profile in
•
the Voice Mail Profiles
has arrived to extension.
QX50/QX200/QX2000; (SW Version 6.0.x)
page regardless of how the call
QX50/QX200/QX2000 Manual III: Extension User's Guide
Fig.III- 38: Voicemail Profile page
Fig.III- 37: Intercom page
43