Pbx Information; Speed Calling - Epygi Manual III User Manual

PBX Information

The PBX Information page provides read only information
about the extension codecs, other existing extensions and
available PSTN lines on the QX IP PBX depending on the active
interface.
The PBX Information displays a list of available codecs for the
corresponding extension, the list of other extensions on the QX
IP PBX, their Display names, the SIP registration username and
line number (if attached). Any shared FXO lines, E1/T1 and
ISDN trunks are also visible here.

Speed Calling

The Speed Calling service of QX IP PBX simplifies dialing to the called destination. It provides short digit combinations for frequently dialed phone
numbers. From this page, you may assign short digit combinations to certain destinations to make the dialing easy and avoid long phone number dialing.
To call the corresponding destination using Speed Calling service, dial
assigned to the Speed Calling Code.
The new Speed Calling entries can also be created from the handset by dialing
The Speed Calling Settings page lists all defined Calling codes
with following parameters:
Add opens the Speed Calling Settings-Add Entry page where
the user may add a preferred key combination for Speed Calling.
Edit opens the Speed Calling Settings-Edit Entry page where
the Speed Calling codes may be edited. The page includes the
same components as the Add Speed Calling Code page.
If no records are selected and the user attempts to Edit or Delete
them, the "No records selected" error message will appear.
The Speed Calling Settings - Add Entry page includes the
following fields and buttons:
Call Type lists the available call types:
PBX - local calls between QX IP PBX extensions and Auto
Attendant
•
SIP – calls through a SIP server
PSTN – calls to PSTN
•
Auto – used for undefined call types. The destination
•
(independent on whether it is a PBX number, SIP address
•
or PSTN number) will be reached through Routing.
QX50/QX200/QX2000; (SW Version 6.0.x)
QX50/QX200/QX2000 Manual III: Extension User's Guide
+ Speed Calling Code from the handset. The system will dial out the destination

(see QX IP PBX's Feature Codes

Fig.III- 11: PBX Information page
for more details).
Fig.III- 12: Speed Calling Settings page
Fig.III- 13: Speed Calling Settings – Add Entry page
27